Poolking’s model PM pump of plastic run quiet and are stable.The pump shaft is made of 316 acid proof stainless steel which is strong and durable.Suction and discharge ports are equipped with convenient unions, provided with a standard 2”connection.Large enough basket is easy to remove and clean.

POOLKING's depth sand filter connected with 2" or 3" flange , it has two different sand beds . Coarser less dense sand at the bottom of the filter bed , and finer , denser particles in the top layer . The downstream filtering allows very deep and effective filtration of particles and higher filtration rates . With this combination , a depth sand filter provides many advantages over a conventional sand filter .The advantage of a fixed nozzle bottom is that filtering takes place through the entire surface . At the backwash , the reverse circulation takes place at depth which results in a very efficient backwashing . In order for a visual inspection to take place in a very simple way , the sand filter is fitted with a sight glass in clear plexiglass . Equipped with manual venting and large manhole for easy maintenance . These filters are well suited to commercial pools or spas.

Waterproof standard:      IP68 Cable length:      2.0m Material:      ABS、PC Installation:      Housing Type

Poolking’s model PMS pump is a self-priming pumps which have the ability to draw water from the pool to the filter and then push it back into the pool.PMS pump is single phase and prefilters integrated into the pump body to prevent sundries from entering which could damage the hydraulic parts of the pump.

POOLKING's depth sand filter is made of non- corrosion fiberglass and resin and connected with 2' or 2.5" multiport valve . It offers a more thorough filtration with the standard of either 0.8m or 1.25m depth sand bed withich is suitable for high filtration performance of residential and commercial pool & spa . It is UV- resistant , and ca operate under prolong sunlight.

12”(300mm) new design PE filter with pump is specially designed for small size above ground pools or family pool. It is compact and simple assembly. The pump is 0.33hp which is suitable for 25-30m3 volume pools. It is economical and environmentally friendly.You don’t have any headache to maintain and inspect.

Poolking’s model PLB pump is design for commercial pools which is from 5.5hp to 15hp.Specially it can be applied to hot spring that can bear up to 70oC. PLB pumps includes 90/110mm flange that can offer convenience for project installation. The transparent cover with a rapid ring lock provides a view into the interior of the prefilter and provides easy access.

Waterproof standard:   IP68Cable length:   2.0mMaterial:   ABS、PCInstallation:   Housing Type

Poolking’s model PL pump is designed for hot spring,which can bear the maximum 60 0C.This high performance ,medium head pump comes complete with 316 stainless steel shaft and graphite ceramic mechanical seal for working pressure up to 6kg/cm2.Ring lock seal design to eliminate suction leaks and to maximize suction efficiency.

POOLKING top mount bobbin wound deed bed filters improve the filtration efficiency over standard filters by providing enhanced in - depth filtration and increased dirt capacity . Undesired particles like rust , sand , dirt and other impurities found in water are trapped by the filter bed, offering crystal clear filtered water for domestic and light commercial usage.

Waterproof standard:      IP68 Cable length:      1.5m Material:      ABS、PC Installation:      Wall Mounted Accessories:      Transformer & remote control

POOLKING top mount bobbin wound deed bed filters is designed for filtering incoming water supply of apartment usage . It has the advantage of simple operation , ultra long life and high durability . The filter's bed depth retains finer dirt particles and colloidal particles to a far greater level than a filter with a standard bed depth.