loading

Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.   ​​​​​​​  Email: sandy@poolking.co

where is the pool pump basket

Author: Poolking - Swimming Pool Equipment Manufacturer

Where Is the Pool Pump Basket?

A pool pump basket is an essential component of a pool pump system, responsible for filtering out debris such as leaves and twigs that can clog up the pump and cause it to malfunction. However, if you are a new pool owner or unfamiliar with pool maintenance, it can be confusing to locate the pump basket. In this article, we will outline the common locations and methods for finding the pool pump basket.

Subtitles:

1. Importance of the Pump Basket

2. Common Locations of the Pool Pump Basket

3. How to Locate the Pool Pump Basket

4. Troubleshooting the Pump Basket

5. Tips on Maintaining the Pump Basket

Importance of the Pump Basket

The pump basket is crucial to the health of your pool pump system as it catches any debris that may enter the system, preventing it from entering and clogging the pump. A clean pump basket means efficient water circulation and minimal wear and tear on the system. Ignoring this small yet essential part of your pool's maintenance can lead to costly repairs or replacement of the pump.

Common Locations of the Pool Pump Basket

The pool pump basket is typically located near the pump, which is usually situated in a shed or on a concrete slab next to the pool. Depending on the age and model of the pump, the basket may be found in one of three locations: the top, side, or bottom of the pump. Newer models often have the basket placed at the top, while older models have it in the back of the pump, beside the motor.

How to Locate the Pool Pump Basket

The location of the pump basket will depend on the specific model and make of your pump, so it's essential to consult the manual that came with your pump. Alternatively, check the manufacturer's website for a copy of the manual for your pump's model. The manual will include detailed illustrations of the pump and its components, including the basket.

If you do not have a manual or access to the manufacturer's website, then you can locate the pump basket by following the piping that leads to and from the pump. Look for a section of piping with a valve or a join that can be unscrewed, and this is where you will find the pump basket. Remember to turn off the pump before opening the pump basket compartment to avoid injury and damage to the system.

Troubleshooting the Pump Basket

A dirty pump basket will efficiently filter out unwanted debris and put strain on the pool pump's motor, leading to a decrease in efficiency, lower water flow rate or even complete failure. To avoid this, it is recommended you check the pump basket at least once a week and especially if you notice a decrease in water flow or pressure.

If you notice that water is not flowing through the pump, turn off the pump and check the basket. If it is full of debris, remove the basket and clean it thoroughly with a hose. Use a brush or a specialized cleaning tool to remove stubborn debris stuck on the pump basket.

Tips on Maintaining the Pump Basket

As mentioned earlier, it is vital to maintain a clean pump basket to keep the pump running efficiently. Besides, it will extend the life of your pump and reduce the frequency of costly repairs. Here are a few tips on how to maintain the pump basket:

1. Clean the basket regularly, preferably once a week

2. Replace the o-ring on the pump basket lid annually to prevent leaks

3. Check and replace the pump strainer periodically for better water flow

4. Keep the area around the pump clean and free of debris that can clog up the pump.

In conclusion, locating the pool pump basket is essential to maintaining efficient water circulation and reducing wear and tear on the system. Checking the manual, following the piping, and consulting a pool professional can all help you find the pump basket's exact location. Remember to check and clean the pump basket regularly to prevent costly damage and ensure a healthy and clean pool.

.

GET IN TOUCH WITH Us
recommended articles
News Application Products Transport
How To Prime Swimming Pool Pump?
Your swimming pool pump is the central circulation system of your pool. Without it, your swimming pool waters wouldn't be fit for swimming.
Poolking Filters in Liaocheng Underwater World
Liaocheng undersea world takes sightseeing, interactive experience and popular science education as its theme, including exploring Amazon, interactive exhibition area, jellyfish Pandora, boutique marine life, sea animal performance, theme exhibition area, popular science classroom, children's fun world, otter exhibition area, large water body (undersea tunnel), marine theater and other exhibition areas, and adds a variety of scientific and technological interactive experiences.
Opening Hours
After about 5~10days ,or when the reading of the pressure gauge on the pump side of the filter has increased by about 0.2bars since the last backwash , backwash the filter as follows:
1. Stop the pump
2.Close the valves on the suction and return lines.
3.Open the cover of the pump and empty the filter gasket .
4.Refit the cover
5.Open the valve to the drain outlet
6.Turn the lever to BACKWASH
7. Open the valves to the suction and return lines.
8.Start the pump .Rinse the filter for about 1 to 2 minutes until the water in the sight glass is clear .
NOTE : Any electric heater must be off .
9. Stop the pump
10. Turn the lever to RINSE , start the pump and rinse for about 15~30 seconds. Stop the pump and turn the lever to FILTER . This is the normal operating position .
11. Close the drain outlet valve and start the pump . Switch on the electric heater if any .
----It is best to replace the silica sand of sand filters every 1-2 years for the following reasons:
a During backwashing, the filtration bed volume will expand upwards by 1.2 to 1.3 times. The water flow will drive the filtration layer to flow up and down, causing the filtration material particles to collide with each other. Backwash will let the small sand evacuate.
b.Some silica sands will be welded when the acid and alkali are changed due to insufficient purity;
Therefore, the longer the time, the worse the filtering effect of the sand tank. Since backwashing will consume and take away some sand, we need to replace the sand in the sand tank within the specified period.
The 137th Canton Fair has arrived as scheduled.
Global attention converges on Guangzhou
no data

Best swimming pool equipment manufacturer - Poolkin will continue for innovative management and excellent quality. Imagination will subvert the future, intelligent manufacturing will lead the era, that's the motto of Poolking!

If you have any question,please contact us.

Contact: Sandy

Email: sandy@poolking.co

Sales Hot line: +86-20-34982303

WhatsApp:+86-13922334815

Add: No. 80, Danan North Road, Dagang Village, Dagang Town, Nansha District, Guangzhou City (temporary business premises)

Copyright © 2025 Guangdong Poolking filtration equipment manufacturing co. Ltd. - www.poolking.co All Rights Reserved. | Sitemap
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service
detect