loading

Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.   ​​​​​​​  Email: sandy@poolking.co

what time should i run my pool filter

Poolking | Pool Sand Filter Manufacturers

Introduction:

Having a pool in your backyard is one of the best things to enjoy during the summer season. But along with the fun, it comes with a responsibility to keep the pool clean and well-maintained. Filtering the pool water is an important aspect of pool maintenance. However, many pool owners do not know when to run their pool filter. In this article, we will cover everything you need to know about the right time to run your pool filter.

1. What is the purpose of a pool filter?

Before discussing the right time to run a pool filter, let's first understand the function of the pool filter. The pool filter is responsible for removing dirt, debris, and other impurities from the pool water. It works by pushing the water through a filter medium that traps and removes the small particles from the water. The pool filter is a critical piece of equipment that helps keep your pool water clean, clear, and healthy.

2. How long should you run your pool filter?

The amount of time you run your pool filter depends on several factors such as the pool size, the number of people using the pool, and local weather conditions. Typically, it is recommended to run your pool filter for at least 8 hours a day. However, for larger pools, heavy usage, or hot and humid weather, you may need to run it for more than 8 hours.

3. When is the best time to run your pool filter?

The best time to run your pool filter is during the day when the sun is shining the brightest. This is because the sunlight promotes the growth of algae in the pool, and running the filter during this time helps prevent the growth of algae, which can lead to cloudy water and the need for additional chemicals to clear it up.

4. Can you run your pool filter at night?

Yes, it is possible to run your pool filter at night. However, it is not recommended to do so since running the filter at night can promote heat loss in the pool water. In addition, running the pool filter at night can also be noisy and disturb your neighbors. So, it's best to run the filter during the day.

5. Can you use a timer to control when the pool filter runs?

Yes, using a timer to control when your pool filter runs is an effective and convenient way to maintain your pool. A timer is a device that allows you to set when the pool filter turns on and off. By using a timer, you can ensure that the filter runs for the recommended 8 hours a day without having to manually turn it on and off each day.

Conclusion:

In conclusion, running your pool filter is an important part of maintaining a clean and healthy pool. The recommended time to run your pool filter is at least 8 hours a day, during the day when the sun is shining the brightest. Avoid running the filter at night to prevent heat loss and neighbor disturbance. Using a timer is an easy way to control when your pool filter runs, making pool maintenance a breeze. By following these simple tips, you can keep your pool water crystal clear and ready for a refreshing swim at any time of the day.

.

GET IN TOUCH WITH Us
recommended articles
News Application Products Transport
After about 5~10days ,or when the reading of the pressure gauge on the pump side of the filter has increased by about 0.2bars since the last backwash , backwash the filter as follows:
1. Stop the pump
2.Close the valves on the suction and return lines.
3.Open the cover of the pump and empty the filter gasket .
4.Refit the cover
5.Open the valve to the drain outlet
6.Turn the lever to BACKWASH
7. Open the valves to the suction and return lines.
8.Start the pump .Rinse the filter for about 1 to 2 minutes until the water in the sight glass is clear .
NOTE : Any electric heater must be off .
9. Stop the pump
10. Turn the lever to RINSE , start the pump and rinse for about 15~30 seconds. Stop the pump and turn the lever to FILTER . This is the normal operating position .
11. Close the drain outlet valve and start the pump . Switch on the electric heater if any .
----It is best to replace the silica sand of sand filters every 1-2 years for the following reasons:
a During backwashing, the filtration bed volume will expand upwards by 1.2 to 1.3 times. The water flow will drive the filtration layer to flow up and down, causing the filtration material particles to collide with each other. Backwash will let the small sand evacuate.
b.Some silica sands will be welded when the acid and alkali are changed due to insufficient purity;
Therefore, the longer the time, the worse the filtering effect of the sand tank. Since backwashing will consume and take away some sand, we need to replace the sand in the sand tank within the specified period.
Poolking's super commercial sand filters in Moscow Zoo
Moscow Zoo(Московский зоопарк)is the first zoo in Russia with more than 1,000 kinds of animals .The zoo is the member of the World and European Association of Zoos and Aquariums.
2020 Poolking's new hollywood video is born
Using 3 months to prepare a new hollywood video is going to on line at the begginning of 2022.The video will let you have wonderful vision to show Poolking evolving from an advanced manufacturer to a leading intellectual creator.You can see it in the website,youtube,facebook and ect.
no data

Best swimming pool equipment manufacturer - Poolkin will continue for innovative management and excellent quality. Imagination will subvert the future, intelligent manufacturing will lead the era, that's the motto of Poolking!

If you have any question,please contact us.

Contact: Sandy

Email: sandy@poolking.co

Sales Hot line: +86-20-34982303

WhatsApp:+86-13922334815

Add: No. 80, Danan North Road, Dagang Village, Dagang Town, Nansha District, Guangzhou City (temporary business premises)

Copyright © 2025 Guangdong Poolking filtration equipment manufacturing co. Ltd. - www.poolking.co All Rights Reserved. | Sitemap
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service
detect