Problems that should be paid attention to in the use of ultraviolet sterilizers

Problems that should be paid attention to in the use of ultraviolet sterilizers 1. Suitable water temperature for the use of ultraviolet sterilizers: 5°C~50°C; ambient temperature for use: -5°C~50°C; ambient relative humidity: not more than 93% (when the temperature is 25°C ). 2. Suitable voltage for the use of ultraviolet sterilizer: AC 220V±10V, 50Hz. 3. The use of ultraviolet sterilizer is suitable for drinking water: the transmittance (T254) of 1cm of the water entering the treatment equipment: 95%~100%; when the raw water quality is lower than the national drinking water standard (such as: chromaticity higher than 15 degrees, If the temperature is higher than 5 degrees and the iron content is higher than 0.3 mg/L), first use other purification and filtration methods to make the purification reach the standard and then purify it with UV-C water quality treatment equipment.

4. The use of ultraviolet sterilizer is suitable for treating aquaculture water: fresh water and sea water filtered by sand filter or other treatments. 5. The use of ultraviolet sterilizer is suitable for sewage treatment: according to the sterilization requirements, the transmittance (T254) of 1cm of the water entering the treatment equipment: ≥ 40%; other requirements meet the second level in the national "Comprehensive Wastewater Discharge Standard" GB8978-1996 standard. 6. The use of ultraviolet sterilizer is suitable for treating the water that needs to be treated. If the water quality cannot meet the above requirements, it should go through appropriate pre-treatment, such as flocculation, sedimentation, filtration, etc., to remove various impurities in the water.

Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..