loading

Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.   ​​​​​​​  Email: sandy@poolking.co

Cleaning and maintenance of UV sterilizer

Cleaning and maintenance of ultraviolet sterilizer 1. The best conditions for the use of ultraviolet sterilizers are: water temperature: 5°C-50°C Relative temperature: not more than 93% (at 25°C) Voltage: 220±10V 50Hz The water quality of drinking water entering the treatment equipment has a transmittance of 95%-100% in 1cm. If the water quality to be treated is lower than the national standard, such as the chromaticity is higher than 15 degrees, the turbidity is higher than 5 degrees, and the iron content is higher than 0.3 mg/L, first use other purification and filtration methods to make it reach the standard before use. Ultraviolet sterilization equipment. 2. Periodic inspection: to ensure the normal operation of the ultraviolet lamp.

The UV lamp should be turned on continuously, repeated switching will seriously affect the service life of the lamp. 3. Regular cleaning: According to the water quality, the ultraviolet lamp tube and the quartz glass sleeve need to be cleaned regularly. Wipe the lamp tube with alcohol cotton ball or gauze, remove the dirt on the quartz glass sleeve and wipe it clean, so as not to affect the transmittance of ultraviolet rays , and affect the bactericidal effect. 4. Replacement of lamp tubes: after 9000 hours of continuous use of imported lamp tubes, or after one year, the ultraviolet lamp tubes should be replaced to ensure a high sterilization rate.

When replacing the lamp tube, first unplug the lamp power socket, pull out the lamp tube, then carefully insert the cleaned new lamp tube into the sterilizer, install the sealing ring, check for water leakage, and then plug in the power supply. Be careful not to touch the quartz glass of the new lamp with your fingers, otherwise the bactericidal effect will be affected by stains. 5. Prevention of ultraviolet radiation: Ultraviolet rays have strong lethality to bacteria, and also have certain damage to the human body. When starting the disinfection lamp, avoid direct exposure to the human body. If necessary, use protective glasses. Do not directly look at the light source with your eyes to avoid Burns the eye mask.

Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..

GET IN TOUCH WITH Us
recommended articles
News Application Products Transport
How To Prime Swimming Pool Pump?
Your swimming pool pump is the central circulation system of your pool. Without it, your swimming pool waters wouldn't be fit for swimming.
----It is best to replace the silica sand of sand filters every 1-2 years for the following reasons:
a During backwashing, the filtration bed volume will expand upwards by 1.2 to 1.3 times. The water flow will drive the filtration layer to flow up and down, causing the filtration material particles to collide with each other. Backwash will let the small sand evacuate.
b.Some silica sands will be welded when the acid and alkali are changed due to insufficient purity;
Therefore, the longer the time, the worse the filtering effect of the sand tank. Since backwashing will consume and take away some sand, we need to replace the sand in the sand tank within the specified period.
Poolking provides hundreds of sand filters for Sanya Haichang Fantasy Town
With the theme of " Silk Road" culture, the park is divided into 8 theme areas: Haitang Bay, African Sea, Persian Gulf, Bengal Bay, Java Sea, South China Sea, as well as a water promenade and a fantasy ocean theater. It combines rare marine animals, amusement equipment and novel themed performances, original African music, Persian Gulf dome and Bengal Bay food, etc. to create a fantastic marine world for everyone.
Wholesale Best workmanship Supplier with good price - Poolking
Poolking Wholesale Best workmanship Supplier with good price - Poolking
Poolking Best workmanship Supplier
no data

Best swimming pool equipment manufacturer - Poolkin will continue for innovative management and excellent quality. Imagination will subvert the future, intelligent manufacturing will lead the era, that's the motto of Poolking!

If you have any question,please contact us.

Contact: Sandy

Email: sandy@poolking.co

Sales Hot line: +86-20-34982303

WhatsApp:+86-13922334815

Add: No. 80, Danan North Road, Dagang Village, Dagang Town, Nansha District, Guangzhou City (temporary business premises)

Copyright © 2025 Guangdong Poolking filtration equipment manufacturing co. Ltd. - www.poolking.co All Rights Reserved. | Sitemap
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service
detect