loading

Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.   ​​​​​​​  Email: sandy@poolking.co

Introduction of SUS304 stainless steel and comparison between 201 material and 304 material

Now SUS304 stainless steel is more and more widely used in the market. At the same time, there are many manufacturers who use 201 material to replace 304 material. After one to two years of use, they have brought huge economic losses to customers. Here to popularize some knowledge about SUS304 stainless steel material. According to the above table, we know the chemical composition of stainless steel. The reason why stainless steel is called "stainless" is because it contains Ni. What does Ni mean? Let's focus on it: Nickel (Ni): approximately silvery white, hard and ductile A ferromagnetic metal element that is highly polished and corrosion-resistant. It is green when dissolved in nitric acid. It is mainly used in alloys (such as nickel steel and nickel silver) and as catalysts (such as Raney nickel, especially as a catalyst for hydrogenation) [nickel].

Element use: Metal elements with ferromagnetism, which can be highly polished and corrosion-resistant, mainly used in alloys (such as nickel steel and nickel silver) and as catalysts (such as Raney nickel, especially for hydrogenation catalysts) , can be used to make currency, etc., and can be plated on other metals to prevent rust. Based on the above knowledge, we can easily understand that stainless steel does not rust because it contains nickel, so it does not rust and is corrosion-resistant. However, the 201 material on the market does not contain nickel at all, so it cannot meet the standard of drinking water, and Because it is not corrosion-resistant and easy to rust, it has a short service life, is easily damaged, and is difficult to maintain. The glossiness of SUS304 stainless steel is much better than that of 201 material. When customers choose materials, they can distinguish them through liquid medicine detection or comparison of glossiness. I hope this article can bring you a little understanding of the materials of stainless steel water tanks.

Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..

GET IN TOUCH WITH Us
recommended articles
News Application Products Transport
----It is best to replace the silica sand of sand filters every 1-2 years for the following reasons:
a During backwashing, the filtration bed volume will expand upwards by 1.2 to 1.3 times. The water flow will drive the filtration layer to flow up and down, causing the filtration material particles to collide with each other. Backwash will let the small sand evacuate.
b.Some silica sands will be welded when the acid and alkali are changed due to insufficient purity;
Therefore, the longer the time, the worse the filtering effect of the sand tank. Since backwashing will consume and take away some sand, we need to replace the sand in the sand tank within the specified period.
Bigger is not always better when it comes to pool pumps. A pool pump that is too large can hinder filtration and can even damage a pool’s filter and/or heater. It is therefore very important to know the size of a pool before purchasing a pool pump. If there is additional equipment (such as water features) installed into the pool, it will have to be taken it into account when deciding what size pump is going to be purchased. The more equipment is installed into a pool, the more powerful the pump needs to be.
It is important to consult with a pool equipment expert, such as Poolking's Pumps, before buying a pool pump. The team at Poolking will be able to give our customers professional advice regarding the size of the pump they will need to purchase.
Wholesale Best workmanship Supplier with good price - Poolking
Poolking Wholesale Best workmanship Supplier with good price - Poolking
Poolking Best workmanship Supplier
----Yes, they can. Silica sand is mainly used for filtration, while activated carbon is mainly used for adsorption. Silica sand is effective for higher water quality requirements. When use them together, silica sand should be placed on the bottom layer, and then activated carbon should be filled on the sand, but the cost of using two media is much higher.
no data

Best swimming pool equipment manufacturer - Poolkin will continue for innovative management and excellent quality. Imagination will subvert the future, intelligent manufacturing will lead the era, that's the motto of Poolking!

If you have any question,please contact us.

Contact: Sandy

Email: sandy@poolking.co

Sales Hot line: +86-20-34982303

WhatsApp:+86-13922334815

Add: No. 80, Danan North Road, Dagang Village, Dagang Town, Nansha District, Guangzhou City (temporary business premises)

Copyright © 2025 Guangdong Poolking filtration equipment manufacturing co. Ltd. - www.poolking.co All Rights Reserved. | Sitemap
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service
detect