loading

Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.   ​​​​​​​  Email: sandy@poolking.co

Six requirements for indoor swimming pools

A constant temperature swimming pool is also called an indoor constant temperature swimming pool; the temperature of the swimming pool water is kept at 26°C~28°C, which is the optimum temperature for the human body. During design, the water body of the indoor swimming pool will be heated in various ways to maintain a constant temperature. So what issues need to be paid attention to when building an indoor constant temperature swimming pool: 1. Load-bearing issues: The location of the construction floor of the swimming pool, the first floor or the basement of the room does not need to consider the load-bearing issue of the floor; if the swimming pool floor is in the middle, the floor needs to be reinforced. Swimming pool construction is possible. 2. The problem of floor height: Generally, the floor height of an indoor constant temperature swimming pool is best between 4 and 6 meters. If the floor is too low, the customer's experience is not good, and if the floor is too high, it is not conducive to keeping warm in winter.

3. Whether there are pillars in the floor can be built: the answer is that an indoor swimming pool can be built, and the pillars can be used reasonably to layout the swimming pool to make the pillars beautiful. 4. Space size: According to the space size and layout of the floor, reasonably plan the layout of the swimming pool and infrastructure. 5. Water quality issues: The pool water is not easily polluted by external substances, and because it is at a constant temperature, it is more comfortable for people to enter the water, and it is not easily affected by the external climate.

Sixth, the water temperature problem: First, select the appropriate heating facility according to the size of the swimming pool to heat the pool water for circulation. Second, the indoor temperature must be higher than the pool temperature by more than 2°C to ensure that the pool water temperature is not easy to disperse. Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..

GET IN TOUCH WITH Us
recommended articles
News Application Products Transport
Poolking Filters in Liaocheng Underwater World
Liaocheng undersea world takes sightseeing, interactive experience and popular science education as its theme, including exploring Amazon, interactive exhibition area, jellyfish Pandora, boutique marine life, sea animal performance, theme exhibition area, popular science classroom, children's fun world, otter exhibition area, large water body (undersea tunnel), marine theater and other exhibition areas, and adds a variety of scientific and technological interactive experiences.
Opening Hours
After about 5~10days ,or when the reading of the pressure gauge on the pump side of the filter has increased by about 0.2bars since the last backwash , backwash the filter as follows:
1. Stop the pump
2.Close the valves on the suction and return lines.
3.Open the cover of the pump and empty the filter gasket .
4.Refit the cover
5.Open the valve to the drain outlet
6.Turn the lever to BACKWASH
7. Open the valves to the suction and return lines.
8.Start the pump .Rinse the filter for about 1 to 2 minutes until the water in the sight glass is clear .
NOTE : Any electric heater must be off .
9. Stop the pump
10. Turn the lever to RINSE , start the pump and rinse for about 15~30 seconds. Stop the pump and turn the lever to FILTER . This is the normal operating position .
11. Close the drain outlet valve and start the pump . Switch on the electric heater if any .
a.Firstly you can tell me the pool size such as wide, length and depth.The circulation period is 4 hours,then we can use the pool volume divide by 4 to know the flow rate.Based on this we can know choose the suitable model for sand filter and pump.
b.Usually 4 meters can install a pool light.Both ends of the pool can install the ladders.
The basic filtration equipment can be chosen like above method.The other accessories can be fixed according to the using environment and requirement.
----It is best to replace the silica sand of sand filters every 1-2 years for the following reasons:
a During backwashing, the filtration bed volume will expand upwards by 1.2 to 1.3 times. The water flow will drive the filtration layer to flow up and down, causing the filtration material particles to collide with each other. Backwash will let the small sand evacuate.
b.Some silica sands will be welded when the acid and alkali are changed due to insufficient purity;
Therefore, the longer the time, the worse the filtering effect of the sand tank. Since backwashing will consume and take away some sand, we need to replace the sand in the sand tank within the specified period.
no data

Best swimming pool equipment manufacturer - Poolkin will continue for innovative management and excellent quality. Imagination will subvert the future, intelligent manufacturing will lead the era, that's the motto of Poolking!

If you have any question,please contact us.

Contact: Sandy

Email: sandy@poolking.co

Sales Hot line: +86-20-34982303

WhatsApp:+86-13922334815

Add: No. 80, Danan North Road, Dagang Village, Dagang Town, Nansha District, Guangzhou City (temporary business premises)

Copyright © 2025 Guangdong Poolking filtration equipment manufacturing co. Ltd. - www.poolking.co All Rights Reserved. | Sitemap
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service
detect