loading

Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.   ​​​​​​​  Email: sandy@poolking.co

Maintenance of UV sterilizer

① The ideal conditions for the use of ultraviolet sterilizers are: Water temperature: 5°C-50°C Relative temperature: not more than 93% (at a temperature of 25°C) Voltage: 220±10V50Hz The water quality of drinking water entering the treatment equipment has a transmittance of 95 at 25px %-100%. If the water quality to be treated is lower than the national standard, such as the chromaticity is higher than 15 degrees, the turbidity is higher than 5 degrees, and the iron content is higher than 0.3 mg/L, first use other purification and filtration methods to make it reach the standard before use. Ultraviolet sterilization equipment. ②Check regularly to ensure the normal operation of the UV lamp.

The UV lamp should be turned on continuously, repeated switching will seriously affect the service life of the lamp. ③Regular cleaning: According to the water quality, the ultraviolet lamp tube and the quartz glass sleeve need to be cleaned regularly. Wipe the lamp tube with alcohol cotton ball or gauze to remove the dirt on the quartz glass sleeve and wipe it clean, so as not to affect the transmittance of ultraviolet rays. affect the bactericidal effect. ④Replacement of the lamp tube: After the imported lamp tube has been used continuously for 9000 hours, or after one year, the ultraviolet lamp tube should be replaced to ensure a high sterilization rate.

When replacing the lamp tube, first unplug the lamp power socket, pull out the lamp tube, then carefully insert the cleaned new lamp tube into the sterilizer, install the sealing ring, check for water leakage, and then plug in the power supply. Be careful not to touch the quartz glass of the new lamp with your fingers, otherwise the bactericidal effect will be affected by stains. ⑤Prevention of ultraviolet radiation: Ultraviolet rays have strong lethality to bacteria, and also have certain damage to the human body. When starting the disinfection lamp, avoid direct exposure to the human body. If necessary, use protective glasses. Do not directly look at the light source with your eyes to avoid burns eye mask.

Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..

GET IN TOUCH WITH Us
recommended articles
News Application Products Transport
After about 5~10days ,or when the reading of the pressure gauge on the pump side of the filter has increased by about 0.2bars since the last backwash , backwash the filter as follows:
1. Stop the pump
2.Close the valves on the suction and return lines.
3.Open the cover of the pump and empty the filter gasket .
4.Refit the cover
5.Open the valve to the drain outlet
6.Turn the lever to BACKWASH
7. Open the valves to the suction and return lines.
8.Start the pump .Rinse the filter for about 1 to 2 minutes until the water in the sight glass is clear .
NOTE : Any electric heater must be off .
9. Stop the pump
10. Turn the lever to RINSE , start the pump and rinse for about 15~30 seconds. Stop the pump and turn the lever to FILTER . This is the normal operating position .
11. Close the drain outlet valve and start the pump . Switch on the electric heater if any .
Using non metallic components fiberglass pressure tanks are rapidly replacing steel tanks in numerous applications. Fiberglass vessels offer several advantages in comparison with steel vessels .
Fiberglass vessels have a mechanical and chemical resistance superior to steel . Fiberglass tanks do not rust or corrode and are able to withstand damage from many types of water treatment chemicals.
no data

Best swimming pool equipment manufacturer - Poolkin will continue for innovative management and excellent quality. Imagination will subvert the future, intelligent manufacturing will lead the era, that's the motto of Poolking!

If you have any question,please contact us.

Contact: Sandy

Email: sandy@poolking.co

Sales Hot line: +86-20-34982303

WhatsApp:+86-13922334815

Add: No. 80, Danan North Road, Dagang Village, Dagang Town, Nansha District, Guangzhou City (temporary business premises)

Copyright © 2025 Guangdong Poolking filtration equipment manufacturing co. Ltd. - www.poolking.co All Rights Reserved. | Sitemap
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service
detect