how to set up intex pool filter pump

Summer is all about enjoying the sun, the heat, and having a great time. What better way to do that than to install an Intex pool and pump in your home? Setting up this equipment might seem like a daunting task, but we have got you covered. In this article, we will guide you through the steps involved in setting up an Intex pool filter pump.

Gather Your Tools and Materials

Before you start setting up your Intex pool filter pump, it is essential to make sure that you have all the necessary tools and materials. Here is a list of things that you will need:

- Your Intex pool filter pump

- A water source

- A garden hose

- A screwdriver

- Sandpaper

- Teflon tape

Prepare the Filter Pump

1. Before you start setting up the pump, make sure that it is unplugged.

2. If this is your first time installing the filter pump, you need to ensure that the hoses and filter cartridges are clean, and the pump is free from any debris. Always clean the hoses and filter cartridges with fresh water.

3. Check for any damages in the filter cartridges and hoses. Replace any damaged parts before you proceed further.

Set Up the Filter Pump

1. Place the Intex filter pump on a flat surface near the power source.

2. Place the inlet and outlet hoses on the pump and secure them firmly.

3. Attach the other end of the inlet hose to the pool's water inlet/outlet fitting.

4. Make sure that the pool water inlet/outlet fitting is tightly sealed.

5. Attach the other end of the outlet hose to the pool's return inlet fitting.

6. Install the filter cartridge into the pump.

7. Attach the strainer cover to the pump, ensuring that it is tightly sealed.

8. Open the air release valve on top of the pump to release any air in the system.

9. Close the release valve once the pump is full of water.

Test the Pump

1. Once you have completed the installation, plug in the filter pump.

2. Allow the pump to run for a few minutes and check if there are any leaks or issues.

3. Turn off the pump, unplug it, and check all the connections once again.

4. If there are no leaks, you are good to go. Your Intex pool filter pump is now installed and ready to use.

Closing Thoughts

Setting up an Intex pool filter pump can seem like a daunting task, but it is relatively easy with a few simple steps. Now that you have followed these steps, you can rest assured that your pool will remain clean and fresh throughout the summer months. Get ready to enjoy your summer with your newly installed Intex pool filter pump.

Subtitles:

- Gather Your Tools and Materials

- Prepare the Filter Pump

- Set Up the Filter Pump

- Test the Pump

- Closing Thoughts