how to remove pool filter cartridge

Author: Poolking - Swimming Pool Equipment Manufacturer

How to Remove Pool Filter Cartridge

Maintaining a pool filter is an important part of pool ownership. It ensures that the pool water is clean and clear, and that the filter works properly. However, over time, the pool filter cartridge may become clogged or worn out, and it will need to be replaced. In this article, we will guide you on how to remove a pool filter cartridge.

What is a Pool Filter Cartridge?

A pool filter cartridge is a device that captures dirt and debris in the pool water as it flows through the filter. It is made up of several layers of material, usually polyester, that trap the dirt and debris as the water passes through. The cartridge needs to be cleaned and replaced periodically to ensure that the filter continues to function properly.

Subheading 1: Turn off the Power

Before removing the pool filter cartridge, it is important to turn off the power to the pump. This will prevent any accidents or injuries from occurring. Locate the switch for the pump and turn it off. If your pump does not have a switch, you can turn off the circuit breaker that powers the pump.

Subheading 2: Release the Lock

Most pool filters have a locking mechanism that holds the cartridge in place. To remove the cartridge, you will need to release the lock. The location of the lock will vary depending on the type of filter you have. Consult the user manual for your filter to find out where the lock is located.

Subheading 3: Remove the Cartridge

Once the lock has been released, you can remove the cartridge from the filter housing. Be careful, as the cartridge may be heavy and bulky. It is best to have a helper to assist you in removing the cartridge. Lift the cartridge out of the filter housing and place it on a flat surface.

Subheading 4: Clean the Cartridge

After you have removed the cartridge, inspect it for signs of wear and tear. If it is in good condition, it can be cleaned and reused. If it is damaged or worn out, it will need to be replaced. To clean the cartridge, rinse it thoroughly with a garden hose. Avoid using high-pressure water as this can damage the cartridge. If the cartridge is very dirty, you can soak it in a pool filter cleaner solution for a few hours before rinsing it off.

Subheading 5: Reinstall the Cartridge

Once the cartridge has been cleaned, it can be reinstalled in the filter housing. Make sure that it is properly aligned and secured in place. Re-engage the locking mechanism to hold the cartridge in place. Finally, turn the power back on to the pump.

Conclusion

Cleaning and replacing your pool filter cartridge is an important part of pool maintenance. By following these simple steps, you can easily remove and replace your pool filter cartridge, and keep your pool water clean and clear all summer long.