loading

Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.   ​​​​​​​  Email: sandy@poolking.co

how to install underwater pool lights

Author: Poolking - Swimming Pool Equipment Manufacturer

Installing Underwater Pool Lights: A Simple Guide

Swimming in a pool has never been better, especially when you add some underwater pool lights to it. Not only do they look stunning at night, but they also make it easier for you to swim and enjoy the pool during the evening. In this article, we will guide you on how to install underwater pool lights in your pool.

Tools and Materials Needed

Before you begin, you need to gather all the necessary materials and tools for the job. Here are the things that you need:

1. LED underwater pool lights

2. Screwdriver

3. Electrical tape

4. Waterproof connectors

5. Wire strippers

6. Wire nuts

Step 1: Preparation

The first step is to switch off the power that supplies electricity to the pool. You can do this from your circuit breaker box. It's also essential to make sure that the pool's power is switched off.

Step 2: Drain Water

To install the pool lights, you will need some space to work, so you will have to drain some water from the pool to reach the area you want to work on. You can use a submersible pump to drain the water.

Step 3: Remove old lights

If you have old pool lights or fixtures, you will have to remove them before installing new ones. If you have screws, unscrew the old lights and remove them. If they are sealed with silicone, you can use a putty knife to remove it.

Step 4: Install new lights

Now that you have removed the old lights, you can install the new LED underwater pool lights. Follow the manufacturer's instructions on how to install them. Most LED lights have a bracket that attaches them to the side of the pool.

Step 5: Connect the wires

Once the lights are in place, it's time to connect the wires. You can use waterproof connectors to stop water from getting into the electrical connections. Strip the wires and connect them according to the manufacturer's instructions.

Step 6: Test the lights

Now that you have connected the wires, it's time to test the lights. Turn the power back on and see if the lights are working correctly. If there are any issues, switch off the power and check the connections.

Step 7: Cover the backplate

After testing the lights, make sure to cover the backplate with silicone to protect the electrical connections from water.

Step 8: Refill the pool

Finally, it's time to refill the pool with the water you drained. Wait until the pool is full to switch on the lights.

Conclusion

Overall, installing underwater pool lights is a simple and fun process. With the right tools and materials, you can have them up and running in no time. Not only are they fun to look at, but they also add a level of safety to your pool at night. Use these instructions as a guide to help you install your pool lights without any difficulty.

5 Subtitles

1. Gather all the necessary tools and materials

2. Drain water from the pool before installation

3. Remove old lights

4. Connect the wires

5. Test and confirm the electricity connection is established.

.

GET IN TOUCH WITH Us
recommended articles
News Application Products Transport
Best Best Quality production environment Factory Supplier
Poolking Best Best Quality production environment Factory Supplier
Poolking Best Quality production environment Factory
a. Power failure or motor protection tripped
b. Pump doesn't vent
c. Pump doesn't fill the water
d. Suction line/hose leaking
e. Transparent cover not properly installed - check filter basket - even bolts
f . Inlet suction process is too large g.) Total resistance loss exceeds the allowable range of the pump - recalculate the required pressure
h. Mechanical shaft seal leakage
Poolking won well-known brand awards for consecutive 3 years
On December 6, the 2021 China Swimming Pool Hot Spring SPA Industry Annual Conference was grandly held.     While commending outstanding brands, it also established a new benchmark in industry.                                                                       Poolking won  Well-known brand awards and Product excellent quality award.
The 137th Canton Fair has arrived as scheduled.
Global attention converges on Guangzhou
a.Firstly you can tell me the pool size such as wide, length and depth.The circulation period is 4 hours,then we can use the pool volume divide by 4 to know the flow rate.Based on this we can know choose the suitable model for sand filter and pump.
b.Usually 4 meters can install a pool light.Both ends of the pool can install the ladders.
The basic filtration equipment can be chosen like above method.The other accessories can be fixed according to the using environment and requirement.
----Poolking utilize serval world class production machines to produce the products, and strict quality control system for each products. It treats a small flaw with zero tolerance.
Not only good quality products, but also fast and satisfying after sales service for clients. Let the clients enjoy the clear water and comfortable services.
If Poolking’s products are same quality than others but higher prices, how can Poolking survive ? However Poolking can defeat other players and seize more market share.
Poolking is your best choice!
After about 5~10days ,or when the reading of the pressure gauge on the pump side of the filter has increased by about 0.2bars since the last backwash , backwash the filter as follows:
1. Stop the pump
2.Close the valves on the suction and return lines.
3.Open the cover of the pump and empty the filter gasket .
4.Refit the cover
5.Open the valve to the drain outlet
6.Turn the lever to BACKWASH
7. Open the valves to the suction and return lines.
8.Start the pump .Rinse the filter for about 1 to 2 minutes until the water in the sight glass is clear .
NOTE : Any electric heater must be off .
9. Stop the pump
10. Turn the lever to RINSE , start the pump and rinse for about 15~30 seconds. Stop the pump and turn the lever to FILTER . This is the normal operating position .
11. Close the drain outlet valve and start the pump . Switch on the electric heater if any .
no data

Best swimming pool equipment manufacturer - Poolkin will continue for innovative management and excellent quality. Imagination will subvert the future, intelligent manufacturing will lead the era, that's the motto of Poolking!

If you have any question,please contact us.

Contact: Sandy

Email: sandy@poolking.co

Sales Hot line: +86-20-34982303

WhatsApp:+86-13922334815

Add: No. 80, Danan North Road, Dagang Village, Dagang Town, Nansha District, Guangzhou City (temporary business premises)

Copyright © 2025 Guangdong Poolking filtration equipment manufacturing co. Ltd. - www.poolking.co All Rights Reserved. | Sitemap
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service
detect