how to clean pool filter intex

Author: PoolKing - Pool Sand Filter Manufacturers

Intex pools are some of the most popular above ground pools available in the market. They are perfect for cooling off during hot summer days, but proper maintenance of the pool filter is essential to ensure crystal clear water. A dirty pool filter can not only reduce the efficiency of the pool system, but it can also lead to cloudy water and increase the chances of algae growth. This article will discuss the necessary steps on how to clean your Intex pool filter.

Why Clean Your Intex Pool Filter?

The pool filter's primary function is to remove debris and contaminants from the water, ensuring that the pool stays clean and clear. However, over time, the pool filter accumulates dirt, oil, and debris, reducing its efficiency. This buildup can cause the filter to clog and prevent water from flowing properly, affecting the pool water quality. Therefore, cleaning your Intex pool filter should be a regular maintenance task to ensure your pool stays refreshing and clean.

Tools Needed to Clean Your Pool Filter

Before you start, gather the following tools needed to clean your Intex pool filter:

1. Garden hose or power washer.

2. Pool filter cleaner.

3. A bucket.

4. Gloves.

How to Clean Your Intex Pool Filter

Here are the necessary steps to clean your Intex pool filter:

Step 1: Shut off the pool pump.

The first step is to turn off the pool pump to stop the flow of water. This is essential to prevent any accidents while cleaning the filter.

Step 2: Remove the filter cartridge.

Next, locate the filter cartridge and remove it from the filter housing. If your filter has more than one cartridge, remove all of them from the housing.

Step 3: Rinse the filter cartridge.

Use a garden hose or power washer to rinse the filter cartridge thoroughly. Start at the top of the filter and work your way down, making sure to rinse all the pleats and crevices.

Step 4: Submerge the filter cartridge in a cleaning solution.

Create a cleaning solution by adding four ounces of pool filter cleaner into a bucket of water. Submerge the filter cartridge in the solution, making sure it's fully submerged.

Step 5: Soak the filter cartridge.

Allow the filter cartridge to soak in the solution for at least four hours. This will break down any dirt, oil, or debris inside the filter cartridge.

Step 6: Rinse the filter cartridge again.

Use a garden hose or power washer to rinse the filter cartridge thoroughly again. This will remove any remaining debris and cleaning solution.

Step 7: Reinstall the filter cartridge.

After rinsing, reinstall the filter cartridge in the filter housing. If your filter has more than one cartridge, reinstall all of them in the housing.

Step 8: Restart the pump.

Finally, turn on the pool pump and check the pressure gauge. If the pressure is too high, it could indicate that the filter is clogged, and further cleaning may be necessary.

Conclusion

Cleaning your Intex pool filter is crucial to maintaining clear, refreshing pool water. Be sure to follow the above steps to clean your filter properly. By cleaning your pool filter regularly, you can extend its lifespan and enjoy crystal clear pool water all season long.