loading

Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.   ​​​​​​​  Email: sandy@poolking.co

how to clean paper pool filter

Author: PoolKing - Pool Sand Filter Manufacturers

How to Clean Paper Pool Filter?

Summer season is just around the corner and it’s time to open up your pool. After months of laying dormant, your pool is bound to have accumulated dirt, debris, and bacteria. This may cause the pool water to become cloudy and even unsafe for swimming. Therefore, taking the time to clean your pool filter is essential.

Nowadays, many pool filters are made of paper. These filters are economical, easy to clean, and one of the most common types of pool filters in use today. As paper pool filters trap small particles like debris and leaves, they become congested over a certain period, causing a reduction in water flow. This ultimately affects the water filtration process in the pool. Therefore, it's necessary to clean your paper pool filter on a regular basis. But how do you go about cleaning them effectively? This article will provide you with a step-by-step guide on how to clean paper pool filters.

Why is it Necessary to Clean Paper Pool Filters?

Over time, pool filters become clogged with dirt, debris, and calcium deposits, which hinders the filter's ability to trap particles effectively. This reduced filtration process could lead to an increase in chlorine consumption and pool chemicals. Additionally, cleaning your pool filters regularly ensures that they remain in good condition and last longer. Therefore, it's essential to clean your paper pool filters to ensure crystal clear water, safe swimming condition, and prevent any potential damages to your filtration system.

Step-by-Step Guide on How to Clean Your Paper Pool Filters

1. Turn Off the Pool Pump: Before you begin to clean your paper pool filter, turn off the pool pump to allow the filter to release all pressure.

2. Remove the Paper Pool Filter: Locate the paper pool filter and carefully remove it from the filter housing. Be mindful not to damage it.

3. Inspect the Filter Cartridge: Once you have removed the filter cartridge, inspect it to ensure there are no tears or damage. If any damage is found, replace the filter cartridge with a new one.

4. Rinse the Filter Cartridge: Using a garden hose or a pressure washer, rinse the filter to remove any visible dirt or debris.

5. Soak the Filter Cartridge: Next, prepare a cleaning solution by mixing one cup of trisodium phosphates (TSP) in a bucket of hot water. Soak the pool filter in the solution for at least an hour. This step will work its way into the filter's pleats to dislodge any accumulated dirt or debris.

6. Rinse Again: After soaking the filter cartridge for one hour, rinse it off with water one more time.

7. Let the Filter Cartridge Dry: Allow the filter cartridge to dry in sunlight before reinstalling it into the filter housing.

Tips to Keep in Mind While Cleaning Your Paper Pool Filter

1. Clean your paper pool filter at least once every month.

2. Wear gloves while handling the filter cartridge.

3. Never use a high-pressure water stream while rinsing the pool filter, as this may harm the filter pleats.

4. Ensure you use the recommended cleaning solution to prevent damage to the filter cartridge.

5. Be sure to replace your paper pool filter at least once every season.

Conclusion

Regularly cleaning your pool filter is essential for maintaining clear and clean pool water. If you’re looking for a hassle-free way of cleaning your pool filter, a paper pool filter is the perfect choice. Follow the simple steps outlined in this article, and your paper pool filter will remain effective in trapping unwanted debris, ensuring safe and fun swimming all season long.

.

GET IN TOUCH WITH Us
recommended articles
News Application Products Transport
----It is best to replace the silica sand of sand filters every 1-2 years for the following reasons:
a During backwashing, the filtration bed volume will expand upwards by 1.2 to 1.3 times. The water flow will drive the filtration layer to flow up and down, causing the filtration material particles to collide with each other. Backwash will let the small sand evacuate.
b.Some silica sands will be welded when the acid and alkali are changed due to insufficient purity;
Therefore, the longer the time, the worse the filtering effect of the sand tank. Since backwashing will consume and take away some sand, we need to replace the sand in the sand tank within the specified period.
Using non metallic components fiberglass pressure tanks are rapidly replacing steel tanks in numerous applications. Fiberglass vessels offer several advantages in comparison with steel vessels .
Fiberglass vessels have a mechanical and chemical resistance superior to steel . Fiberglass tanks do not rust or corrode and are able to withstand damage from many types of water treatment chemicals.
Commercial depth sand filter leading by Poolking
Hello, ladies and gentlemen. Today I'd like to introduce Poolking commercial depth sand filter.It is environmental protection and non toxicity.It can be used in large swimming pools, aquariums, aquaculture and other water applications.
no data

Best swimming pool equipment manufacturer - Poolkin will continue for innovative management and excellent quality. Imagination will subvert the future, intelligent manufacturing will lead the era, that's the motto of Poolking!

If you have any question,please contact us.

Contact: Sandy

Email: sandy@poolking.co

Sales Hot line: +86-20-34982303

WhatsApp:+86-13922334815

Add: No. 80, Danan North Road, Dagang Village, Dagang Town, Nansha District, Guangzhou City (temporary business premises)

Copyright © 2025 Guangdong Poolking filtration equipment manufacturing co. Ltd. - www.poolking.co All Rights Reserved. | Sitemap
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service
detect