loading

Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.   ​​​​​​​  Email: sandy@poolking.co

how to clean my pool filter

Author: Poolking - Swimming Pool Equipment Manufacturer

How to Clean My Pool Filter: A Comprehensive Guide

Owning a swimming pool comes with the responsibility of maintaining it. One of the most essential aspects of maintenance is cleaning the pool filter. A dirty filter can result in murky water, ineffective filtration, and dirty pool equipment. This guide will provide you with a comprehensive approach to cleaning your pool filter.

Subsection 1: Knowing Your Pool Filter

Before cleaning your pool filter, it is crucial to understand what type of pool filter you have. The most common types of pool filters are sand, cartridge, and diatomaceous earth (DE) filters.

- Sand filters: These filters use sand as their primary filtration medium. They are easy to maintain and require occasional backwashing to clean.

- Cartridge filters: These filters use a cartridge to trap debris. They are more efficient than sand filters as they can capture smaller particles.

- DE filters: These filters use a powder known as diatomaceous earth to filter out debris. They provide the highest level of filtration, but require more maintenance.

Subsection 2: When to Clean Your Pool Filter

The frequency at which you clean your pool filter depends on how frequently you use your pool and the type of pool filter you have. On average, it is recommended to clean your pool filter at least once per month during the swimming season.

However, if you notice a decrease in water flow, cloudy water, or visible debris within the pool, it is likely time to clean your pool filter.

Subsection 3: Cleaning a Sand Filter

A sand filter requires backwashing to clean it. This process involves reversing the flow of water through the filter and directing it out the waste line.

- Turn off the pool pump and turn the multiport valve to the backwash position.

- Turn on the pool pump and let it run for 2-3 minutes or until the water in the sight glass is clear.

- Turn off the pump and switch the multiport valve to the rinse position.

- Turn on the pump and let it run for 1 minute.

- Turn off the pump and turn the multiport valve back to the filter position.

Subsection 4: Cleaning a Cartridge Filter

A cartridge filter requires manual cleaning using a water hose and a cleaning solution. Here are the steps to cleaning a cartridge filter:

- Turn off the pool pump and remove the cartridge from the filter.

- Use a water hose to wash off any debris or dirt from the cartridge.

- Soak the cartridge in a cleaning solution according to the manufacturer's instructions.

- Rinse the cartridge with a water hose to remove the cleaning solution.

- Reinstall the cartridge back into the filter.

Subsection 5: Cleaning a DE Filter

Cleaning a DE filter requires taking the filter apart and manually hosing off the grids. Here are the steps to cleaning a DE filter:

- Turn off the pool pump and release the pressure in the filter by opening the air relief valve.

- Remove the filter lid and remove the filter grids.

- Hose off the grids with a water hose until they are clean.

- Reassemble the filter and add new DE powder according to the manufacturer's instructions.

Subsection 6: Final Thoughts

Cleaning your pool filter is an essential part of pool maintenance. By following the above steps, you can keep your pool filter clean and ensure that your pool is filtered efficiently, keeping it crystal clear and enjoyable all summer long.

.

GET IN TOUCH WITH Us
recommended articles
News Application Products Transport
Poolking won well-known brand awards for consecutive 3 years
On December 6, the 2021 China Swimming Pool Hot Spring SPA Industry Annual Conference was grandly held.     While commending outstanding brands, it also established a new benchmark in industry.                                                                       Poolking won  Well-known brand awards and Product excellent quality award.
a. Power failure or motor protection tripped
b. Pump doesn't vent
c. Pump doesn't fill the water
d. Suction line/hose leaking
e. Transparent cover not properly installed - check filter basket - even bolts
f . Inlet suction process is too large g.) Total resistance loss exceeds the allowable range of the pump - recalculate the required pressure
h. Mechanical shaft seal leakage
a.Firstly you can tell me the pool size such as wide, length and depth.The circulation period is 4 hours,then we can use the pool volume divide by 4 to know the flow rate.Based on this we can know choose the suitable model for sand filter and pump.
b.Usually 4 meters can install a pool light.Both ends of the pool can install the ladders.
The basic filtration equipment can be chosen like above method.The other accessories can be fixed according to the using environment and requirement.
Commercial depth sand filter leading by Poolking
Hello, ladies and gentlemen. Today I'd like to introduce Poolking commercial depth sand filter.It is environmental protection and non toxicity.It can be used in large swimming pools, aquariums, aquaculture and other water applications.
How To Prime Swimming Pool Pump?
Your swimming pool pump is the central circulation system of your pool. Without it, your swimming pool waters wouldn't be fit for swimming.
---Poolking has a professional Quality Control team to guarantee each product is 100% inspected before packing. For example when the filter inner tank comes out, they will make a first water testing before bobbin wounding. After installation all the connections or manhole & sightglass, they will make the second water testing. During the packing procedure, QC team will inspect all the details like wounding, neck, internal resin and so on to make sure no leaking and without flaw.
no data

Best swimming pool equipment manufacturer - Poolkin will continue for innovative management and excellent quality. Imagination will subvert the future, intelligent manufacturing will lead the era, that's the motto of Poolking!

If you have any question,please contact us.

Contact: Sandy

Email: sandy@poolking.co

Sales Hot line: +86-20-34982303

WhatsApp:+86-13922334815

Add: No. 80, Danan North Road, Dagang Village, Dagang Town, Nansha District, Guangzhou City (temporary business premises)

Copyright © 2025 Guangdong Poolking filtration equipment manufacturing co. Ltd. - www.poolking.co All Rights Reserved. | Sitemap
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service
detect