loading

Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.   ​​​​​​​  Email: sandy@poolking.co

how to clean a sand pool filter

Author: Poolking - Swimming Pool Equipment Manufacturer

How to Clean a Sand Pool Filter

Swimming pools can be a fantastic investment for any home. They offer a way to cool off in the hot summer months and provide a great gathering place for family and friends. However, owning a pool is not all sunshine and rainbows. It requires regular maintenance, including cleaning the pool filter. The sand pool filter is one of the most common types of pool filters in use today. In this article, we will discuss how to clean a sand pool filter and help you keep your pool sparkling clean all season.

What is a Sand Pool Filter?

Before discussing how to clean one, it's important to understand what a sand pool filter is. A sand filter is a type of filter that uses sand as the media for trapping dirt and debris from the pool. The water enters the filter and passes through the sand, where debris is collected in the sand bed. The clean water is then returned to the pool.

Why Clean Your Sand Pool Filter?

Over time, the sand in the filter will become clogged with dirt and debris. This can cause the water flow rate to decrease, resulting in a decreased filtration effect. A clogged filter can also cause the water pressure in your pool to drop, leading to a loss of suction and a decrease in cleaning power. Additionally, dirty filters can become a breeding ground for bacteria, which can cause severe health problems for swimmers.

Subtitles:

- When to Clean Your Sand Pool Filter

- Supplies Needed to Clean a Sand Pool Filter

- Step-by-Step Guide to Clean a Sand Pool Filter

- Backwashing Your Sand Pool Filter

- Replacing the Sand in Your Pool Filter

When to Clean Your Sand Pool Filter

Knowing when to clean your sand pool filter is vital for maintaining the cleanliness of your pool water. There are a few signs that your filter needs to be cleaned, including decreased suction power, pool water not visibly clearing up, or increased pressure on the pressure gauge. A clean filter will have a higher water flow rate and more efficient filtration capabilities, so it's best to keep it clean on a regular basis.

Supplies Needed to Clean a Sand Pool Filter

To clean your sand pool filter, you will need the following supplies:

- A garden hose

- A filter cleaner or degreaser

- A screwdriver or pliers

- New sand (if necessary)

- A water source (such as a hose or bucket)

Step-by-Step Guide to Clean a Sand Pool Filter

Now that you have your supplies, it's time to clean your sand pool filter. Follow these steps to clean your filter effectively:

1. Turn off the pool pump and close the pool valves to prevent any water from flowing through the filter.

2. Remove the sand filter cap or clamp and take out the filter basket.

3. Vacuum or scoop out any debris or excess sand from the filter.

4. Rinse the filter with a hose, removing as much sand as possible.

5. Add filter cleaner or degreaser to the filter, following the instructions on the package.

6. Let the filter cleaner work its magic for at least an hour.

7. Using a hose, rinse the filter thoroughly, making sure that all the cleaner has been washed away.

8. Reassemble the filter, making sure everything is tightly secured.

Backwashing Your Sand Pool Filter

Backwashing your sand pool filter is an essential step in the cleaning process. Backwashing involves reversing the flow of water through the filter to remove any trapped dirt or debris. Follow these steps to backwash your sand pool filter:

1. Turn off the pool pump and close the pool valves to prevent any water from flowing through the filter.

2. Turn the valve to "backwash" and turn on the pool pump.

3. Let the pump run for about two minutes or until the water runs clear.

4. Turn off the pump and turn the valve back to "filter."

5. Turn on the pool pump again.

Replacing the Sand in Your Pool Filter

If your sand pool filter is not cleaning effectively, it may be time to replace the sand completely. Here's how to replace the sand in your pool filter:

1. Turn off the pool pump and close the pool valves to prevent any water from flowing through the filter.

2. Remove the sand filter cap or clamp and take out the filter basket.

3. Scoop out the old sand and dispose of it.

4. Clean the filter thoroughly using steps one to seven of the cleaning process.

5. Refill the filter with new sand, following the manufacturer's instructions.

6. Reassemble the filter, making sure everything is tightly secured.

In conclusion, cleaning your sand pool filter is vital for maintaining the cleanliness of your pool water. By following the steps outlined in this article, you can keep your pool sparkling clean all season long. Remember to clean your filter regularly, backwash when necessary, and replace the sand as needed. With a little bit of work, you can enjoy crystal clear pool water all summer long.

.

GET IN TOUCH WITH Us
recommended articles
News Application Products Transport
Poolking's super commercial sand filters in Moscow Zoo
Moscow Zoo(Московский зоопарк)is the first zoo in Russia with more than 1,000 kinds of animals .The zoo is the member of the World and European Association of Zoos and Aquariums.
Bigger is not always better when it comes to pool pumps. A pool pump that is too large can hinder filtration and can even damage a pool’s filter and/or heater. It is therefore very important to know the size of a pool before purchasing a pool pump. If there is additional equipment (such as water features) installed into the pool, it will have to be taken it into account when deciding what size pump is going to be purchased. The more equipment is installed into a pool, the more powerful the pump needs to be.
It is important to consult with a pool equipment expert, such as Poolking's Pumps, before buying a pool pump. The team at Poolking will be able to give our customers professional advice regarding the size of the pump they will need to purchase.
----Poolking utilize serval world class production machines to produce the products, and strict quality control system for each products. It treats a small flaw with zero tolerance.
Not only good quality products, but also fast and satisfying after sales service for clients. Let the clients enjoy the clear water and comfortable services.
If Poolking’s products are same quality than others but higher prices, how can Poolking survive ? However Poolking can defeat other players and seize more market share.
Poolking is your best choice!
Poolking won well-known brand awards for consecutive 3 years
On December 6, the 2021 China Swimming Pool Hot Spring SPA Industry Annual Conference was grandly held.     While commending outstanding brands, it also established a new benchmark in industry.                                                                       Poolking won  Well-known brand awards and Product excellent quality award.
----It is best to replace the silica sand of sand filters every 1-2 years for the following reasons:
a During backwashing, the filtration bed volume will expand upwards by 1.2 to 1.3 times. The water flow will drive the filtration layer to flow up and down, causing the filtration material particles to collide with each other. Backwash will let the small sand evacuate.
b.Some silica sands will be welded when the acid and alkali are changed due to insufficient purity;
Therefore, the longer the time, the worse the filtering effect of the sand tank. Since backwashing will consume and take away some sand, we need to replace the sand in the sand tank within the specified period.
a.Firstly you can tell me the pool size such as wide, length and depth.The circulation period is 4 hours,then we can use the pool volume divide by 4 to know the flow rate.Based on this we can know choose the suitable model for sand filter and pump.
b.Usually 4 meters can install a pool light.Both ends of the pool can install the ladders.
The basic filtration equipment can be chosen like above method.The other accessories can be fixed according to the using environment and requirement.
Poolking provides hundreds of sand filters for Sanya Haichang Fantasy Town
With the theme of " Silk Road" culture, the park is divided into 8 theme areas: Haitang Bay, African Sea, Persian Gulf, Bengal Bay, Java Sea, South China Sea, as well as a water promenade and a fantasy ocean theater. It combines rare marine animals, amusement equipment and novel themed performances, original African music, Persian Gulf dome and Bengal Bay food, etc. to create a fantastic marine world for everyone.
no data

Best swimming pool equipment manufacturer - Poolkin will continue for innovative management and excellent quality. Imagination will subvert the future, intelligent manufacturing will lead the era, that's the motto of Poolking!

If you have any question,please contact us.

Contact: Sandy

Email: sandy@poolking.co

Sales Hot line: +86-20-34982303

WhatsApp:+86-13922334815

Add: No. 80, Danan North Road, Dagang Village, Dagang Town, Nansha District, Guangzhou City (temporary business premises)

Copyright © 2025 Guangdong Poolking filtration equipment manufacturing co. Ltd. - www.poolking.co All Rights Reserved. | Sitemap
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service
detect