How to choose swimming pool water treatment equipment?

When we are making a swimming pool, we often worry because we don’t know how to choose swimming pool water treatment equipment. Next, let us see how to choose swimming pool circulation equipment. Step 1: Determine the cycle cycle of swimming pool water The cycle cycle refers to the time required for all the pool water to be purified, filtered, and disinfected once. The purpose of determining the cycle period is to limit the maximum allowable concentration of pollutants in the swimming pool. It is determined based on the nature of the swimming pool, the number of swimmers, the water surface area, the volume of the pool water, and the performance of the purification and filtration equipment.

To determine the cycle period, the following factors should be considered: (1) The type of swimming pool. For swimming pools for competitions, private use, hotels, and indoor swimming pools, the number of users is small or the number of people is small and relatively fixed, the quality of swimmers is better, and personal hygiene is maintained before and after swimming, so the degree of pollution to the pool water is slower. , a longer cycle period is desirable in design. On the contrary, when the cleaning facilities of public swimming pools or natatoriums are not perfect, due to the large number of people or poor personal hygiene treatment before swimming, the pool water will be polluted faster, and a shorter cycle should be adopted at this time.

National regulations on the cycle cycle of swimming pools and water parks Note: The above parameters are for reference only, and the selection of the specific cycle cycle should be determined according to the use of the swimming pool. Step 2: Determine the circulation flow, that is, the total water volume of the swimming pool per hour (m3) ÷ cycle period (h) = water treatment per hour (m3/h) Step 3: Determine the model of the filter and determine the front suction of the pump Type or water pump back suction system 1. Water pump front suction system (this system is the recommended system) a) The ground of the machine room is at the same elevation as the water level b) The ground of the machine room is higher than the water level c) The bottom of the machine room is not more than 1.2 meters above the water level 2. Swimming pool Equipment water pump back-suction system (this system is more complex than the former) a) The ground of the machine room must be lower than the water level by more than 4.5 meters Guangdong Boying Environmental Protection Equipment Co., Ltd. It is used in swimming pool filtration system, reclaimed water reuse system, rainwater collection system, ultrafiltration system, building water supply and drainage and HVAC system. The main products are: stainless steel sand tank, hair collector, ultraviolet sterilizer, carbon steel and stainless steel Multi-media filter, reverse osmosis pure water unit, vacuum degasser, automatic water supply and exhaust constant pressure device, pressure expansion tank, various water supply equipment, various water treatment equipment, etc. Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..