loading

Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.   ​​​​​​​  Email: sandy@poolking.co

how often should you replace pool filter cartridges

Author: Poolking - Swimming Pool Equipment Manufacturer

Pool filters are an essential part of keeping your swimming pool clean and safe. They help to remove debris, dirt, and other impurities from the water, ensuring that your pool is clear and free of harmful bacteria. However, like any other appliance, pool filters require regular maintenance and replacement to keep working efficiently. So, how often should you replace pool filter cartridges? Let's find out.

What is a pool filter cartridge?

A pool filter cartridge is made of porous material and is designed to trap dirt, debris, and other impurities from the swimming pool water. The cartridge can be easily removed and replaced, making it an easy and practical option for pool maintenance.

Why is it essential to replace pool filter cartridges?

Over time, pool filter cartridges become clogged with dirt, debris, and other impurities. This buildup can make it more difficult for water to flow through the cartridge, resulting in reduced filtration capacity. A clogged pool filter can also put a strain on your pool pump, causing it to work harder and potentially reducing its lifespan.

When should you replace pool filter cartridges?

Here are some things to keep in mind when determining when to replace your pool filter cartridges:

1. Manufacturer's recommendations: Check the manufacturer's recommendations for your pool filter cartridge. They typically provide guidelines for how often to replace your filter cartridge.

2. Amount of use: The more you use your pool, the more debris and dirt it will collect, and you will have to replace the filter cartridge more often.

3. Type of pool: Saltwater pools may require more frequent filter replacements compared to traditional chlorine-treated swimming pools.

4. Water quality: If your pool is near potentially harmful debris such as leaves or if your pool is located near a construction site, you may have to replace your cartridge more frequently.

5. Season: If you are using your pool more often during the summer months or in regions with year-round warm weather, you may have to change your cartridge more often.

How often should you replace pool filter cartridges?

The answer depends on a few factors. However, as a general rule, pool filter cartridges should be replaced every 12-24 months. With that said, check the manufacturer's recommendations for your specific model and pool size.

Signs your pool filter cartridge needs to be replaced

Here are some signs that it's time to replace your pool filter cartridge:

1. Reduced water flow: If you notice a reduction in water flow, it may be a sign that your filter cartridge is clogged and needs to be replaced.

2. Dirty pool water: If your pool water looks dirty or cloudy, it may be a sign that your filter cartridge isn't working correctly.

3. Increased pressure on the pool pump: If your pool pump is under more strain than usual, it may be a sign that your pool filter cartridge is clogged.

4. Visible wear and tear: If you notice any visible signs of wear and tear on your pool filter cartridge, such as holes or tears, it's time to replace it.

5. Unpleasant odor: If there's an unpleasant odor coming from your pool water, it could be a sign that your filter cartridge is past its usage timeframe.

Conclusion

Pool filter cartridges are a vital component to ensure that your swimming pool is clean and safe to use. Keeping the filter cartridge clean and changing it regularly can help keep your pool in excellent condition, avoid costly repairs, and ensure that your pool water stays sparkling clean. Follow the manufacturer's instructions for changing the pool filter cartridge or have a professional pool service technician assist you. Remember: it's much better to err on the side of caution and replace the cartridge more frequently, rather than waiting too long and risking damage to your pool filter or pump. Happy Swimming!

.

GET IN TOUCH WITH Us
recommended articles
News Application Products Transport
After about 5~10days ,or when the reading of the pressure gauge on the pump side of the filter has increased by about 0.2bars since the last backwash , backwash the filter as follows:
1. Stop the pump
2.Close the valves on the suction and return lines.
3.Open the cover of the pump and empty the filter gasket .
4.Refit the cover
5.Open the valve to the drain outlet
6.Turn the lever to BACKWASH
7. Open the valves to the suction and return lines.
8.Start the pump .Rinse the filter for about 1 to 2 minutes until the water in the sight glass is clear .
NOTE : Any electric heater must be off .
9. Stop the pump
10. Turn the lever to RINSE , start the pump and rinse for about 15~30 seconds. Stop the pump and turn the lever to FILTER . This is the normal operating position .
11. Close the drain outlet valve and start the pump . Switch on the electric heater if any .
Best Best Quality production environment Factory Supplier
Poolking Best Best Quality production environment Factory Supplier
Poolking Best Quality production environment Factory
a. Power failure or motor protection tripped
b. Pump doesn't vent
c. Pump doesn't fill the water
d. Suction line/hose leaking
e. Transparent cover not properly installed - check filter basket - even bolts
f . Inlet suction process is too large g.) Total resistance loss exceeds the allowable range of the pump - recalculate the required pressure
h. Mechanical shaft seal leakage
----Poolking utilize serval world class production machines to produce the products, and strict quality control system for each products. It treats a small flaw with zero tolerance.
Not only good quality products, but also fast and satisfying after sales service for clients. Let the clients enjoy the clear water and comfortable services.
If Poolking’s products are same quality than others but higher prices, how can Poolking survive ? However Poolking can defeat other players and seize more market share.
Poolking is your best choice!
----Yes, they can. Silica sand is mainly used for filtration, while activated carbon is mainly used for adsorption. Silica sand is effective for higher water quality requirements. When use them together, silica sand should be placed on the bottom layer, and then activated carbon should be filled on the sand, but the cost of using two media is much higher.
no data

Best swimming pool equipment manufacturer - Poolkin will continue for innovative management and excellent quality. Imagination will subvert the future, intelligent manufacturing will lead the era, that's the motto of Poolking!

If you have any question,please contact us.

Contact: Sandy

Email: sandy@poolking.co

Sales Hot line: +86-20-34982303

WhatsApp:+86-13922334815

Add: No. 80, Danan North Road, Dagang Village, Dagang Town, Nansha District, Guangzhou City (temporary business premises)

Copyright © 2025 Guangdong Poolking filtration equipment manufacturing co. Ltd. - www.poolking.co All Rights Reserved. | Sitemap
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service
detect