FRP precision filter performance advantages

1. The components are all made of glass fiber reinforced plastic, and the glass fiber reinforced plastic winding process is adopted, which is resistant to corrosion and high pressure. 2.

The internal structure is novel and reasonable, the lower end is a sealing support, and there is an installation guide, and the upper end is a positioning and sealing box, which can adjust the sealing degree. 3. It is opened by manual lifting ring, which can be operated without any tools when installing and replacing the filter element.

4. The filter element and filter bag accessories have structural guidance during installation, automatic alignment, simple and convenient. Precautions for use: 1.

The working pressure cannot exceed the rated range. 2. Open the exhaust valve before starting the machine, and close the exhaust valve after the air is exhausted.

3. When the pressure difference exceeds the rated range, replace the filter element in time. 4.

Before starting the operation, check whether the connecting pipes are tightened, and there should be no running, running, or dripping. 5. If there are stains on the cylinder body, it should be wiped and cleaned in time.

When cleaning, cotton cloth should be used, and hard tools should not be used. The surface should be kept clean and tidy. 6.

Always observe the operating status of the pressure gauge. If it is too high, it means that the accessories are blocked and stagnant. If it is too low, it means that the front-end equipment is faulty, and it should be dealt with in time.

Poolking.