loading

Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.   ​​​​​​​  Email: sandy@poolking.co

do it yourself pool filter

Author: Poolking - Swimming Pool Equipment Manufacturer

Introduction: A DIY Pool Filter - Save Money and Enjoy Clean Water All Summer Long

During the hot summer months, nothing beats the refreshing feeling of diving into a cool, clean pool. However, maintaining a sparkling clean pool requires regular maintenance, including the use of a working pool filter. Investing in a good pool filter can be expensive, but did you know that you can create your own pool filter at a fraction of the cost? With a few basic tools and some ingenuity, you can create a DIY pool filter that will keep your pool water clean and clear all summer long.

So, put on your DIY hat and let's get started!

Materials You Will Need

Before you begin building your DIY pool filter, make sure you have all the necessary materials. Here's a list of what you'll need:

- A plastic container: You can use any type of plastic container. Just make sure it has a lid and is large enough to hold the pool sand, a pump, and the water.

- A pool pump: You'll want to purchase a pump that is strong enough to circulate your pool water properly. You can purchase a pool pump online or at any pool supply store.

- Pool sand: You'll need enough sand to fill your plastic container completely. You can purchase pool sand at any pool supply store.

- PVC piping: You'll need piping to connect the pump to the container and to connect the container to the pool's water intake. You can purchase PVC piping at any hardware store.

- A hacksaw: You'll need a hacksaw to cut the PVC piping to the correct length.

- A drill: You'll need a drill to create the holes in the plastic container for the piping.

- Plumbing tape: You'll need plumbing tape to seal the connections between the piping and the container.

With all these materials at hand, you are ready to start building your DIY pool filter.

Step-by-Step Instructions

Now that you have all the necessary materials, it's time to start building your DIY pool filter. Here are the step-by-step instructions:

Step 1: Cut the PVC piping to the correct length.

Measure the distance between the pool water intake and the plastic container. Cut the PVC piping to this length.

Step 2: Drill a hole in the plastic container.

Use the drill to create a hole in the bottom of the plastic container. This hole should be the same size as the PVC piping.

Step 3: Attach the PVC piping to the container.

Insert the PVC piping into the hole in the container so that it is flush with the plastic. Use plumbing tape to seal the connection.

Step 4: Add the pool sand to the container.

Slowly pour the pool sand into the container, making sure it is level and fills the container completely.

Step 5: Attach the pump to the container.

Attach the pump to the top of the container using additional PVC piping. Make sure the pump is securely attached.

Step 6: Attach the piping to the pool's water intake.

Attach the piping to the pool's water intake, making sure it is securely attached. You may need to use plumbing tape to seal the connection.

Step 7: Turn on the pool pump.

Finally, turn on the pool pump and watch as your DIY pool filter starts to work. The pump will suck in dirty pool water and push it through the pool sand, which will filter out any dirt and debris. The clean water will then flow back into the pool, providing you with crystal-clear water all summer long.

Maintenance of Your DIY Pool Filter

Your DIY pool filter should last all summer long with proper maintenance. To clean the filter, simply turn off the pump, remove the lid from the plastic container, and use a garden hose to rinse out the pool sand. Then, replace the lid and turn the pump back on.

Conclusion: Enjoy Your Clean Pool

With a little time and effort, you can create your very own DIY pool filter and enjoy a happy, clean summer! By following these simple instructions, you can save money and still enjoy cool, clean water all season long. So, get started on your DIY pool filter today and enjoy your beautiful, sparkling pool!

.

GET IN TOUCH WITH Us
recommended articles
News Application Products Transport
Poolking Filters in Liaocheng Underwater World
Liaocheng undersea world takes sightseeing, interactive experience and popular science education as its theme, including exploring Amazon, interactive exhibition area, jellyfish Pandora, boutique marine life, sea animal performance, theme exhibition area, popular science classroom, children's fun world, otter exhibition area, large water body (undersea tunnel), marine theater and other exhibition areas, and adds a variety of scientific and technological interactive experiences.
Opening Hours
The 137th Canton Fair has arrived as scheduled.
Global attention converges on Guangzhou
Wholesale Best workmanship Supplier with good price - Poolking
Poolking Wholesale Best workmanship Supplier with good price - Poolking
Poolking Best workmanship Supplier
Commercial depth sand filter leading by Poolking
Hello, ladies and gentlemen. Today I'd like to introduce Poolking commercial depth sand filter.It is environmental protection and non toxicity.It can be used in large swimming pools, aquariums, aquaculture and other water applications.
How To Prime Swimming Pool Pump?
Your swimming pool pump is the central circulation system of your pool. Without it, your swimming pool waters wouldn't be fit for swimming.
----It is best to replace the silica sand of sand filters every 1-2 years for the following reasons:
a During backwashing, the filtration bed volume will expand upwards by 1.2 to 1.3 times. The water flow will drive the filtration layer to flow up and down, causing the filtration material particles to collide with each other. Backwash will let the small sand evacuate.
b.Some silica sands will be welded when the acid and alkali are changed due to insufficient purity;
Therefore, the longer the time, the worse the filtering effect of the sand tank. Since backwashing will consume and take away some sand, we need to replace the sand in the sand tank within the specified period.
no data

Best swimming pool equipment manufacturer - Poolkin will continue for innovative management and excellent quality. Imagination will subvert the future, intelligent manufacturing will lead the era, that's the motto of Poolking!

If you have any question,please contact us.

Contact: Sandy

Email: sandy@poolking.co

Sales Hot line: +86-20-34982303

WhatsApp:+86-13922334815

Add: No. 80, Danan North Road, Dagang Village, Dagang Town, Nansha District, Guangzhou City (temporary business premises)

Copyright © 2025 Guangdong Poolking filtration equipment manufacturing co. Ltd. - www.poolking.co All Rights Reserved. | Sitemap
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service
detect