loading

Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.   ​​​​​​​  Email: sandy@poolking.co

Do you really know about mechanical filters?

About the mechanical filter: The mechanical filter is made of stainless steel 304 or 316, 316L, Q235, and the filter materials of different particle sizes are arranged in the cylinder from bottom to top according to size. When the water flows from top to bottom, the suspended matter contained in the water flows into the tiny pores formed by the upper layer of filter material, and is subjected to adsorption and mechanical flow resistance, and the suspended matter is intercepted by the surface layer of the filter material. At the same time, the "overlapping" and "bridging" effects occur between these intercepted suspended substances, forming a thin film on the surface of the filter layer, and continuing to filter.

This is the membrane filtration effect of the so-called surface layer of the filter material. This membrane filtration effect not only exists on the surface layer, but also produces this interception effect when the water flow enters the middle filter material layer. Different from the membrane filtration effect of the surface layer, this intermediate interception effect is called permeation filtration effect.

In addition, because the filter materials are closely arranged with each other, when the suspended particles in the water flow through the tortuous channel formed by the filter material particles, there are more opportunities and time to collide and contact with the surface of the filter material, so the suspended matter in the water is red. The particle surface of the filter material flocculates and adheres to each other, and contact coagulation occurs. The working principle of the mechanical filter is to purify the water quality through the process of membrane filtration-permeation filtration-contact coagulation and so on. The stainless steel tank uses quartz sand as the filter medium. Under a certain pressure, the water with high turbidity is filtered through a certain thickness of granular or non-granular quartz sand to effectively intercept and remove suspended solids, organic matter, and colloidal particles in the water. , microorganisms, chlorine, smell and some heavy metal ions, etc., to make water clear water treatment equipment.

According to different water yields, quartz sand with different mesh numbers (quartz sand particles with different diameters) needs to be equipped. They are all used for water treatment to remove turbidity, soften water, and pre-treatment of pure water. The turbidity of the effluent can reach Below 3 degrees. Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..

GET IN TOUCH WITH Us
recommended articles
News Application Products Transport
The 137th Canton Fair has arrived as scheduled.
Global attention converges on Guangzhou
After about 5~10days ,or when the reading of the pressure gauge on the pump side of the filter has increased by about 0.2bars since the last backwash , backwash the filter as follows:
1. Stop the pump
2.Close the valves on the suction and return lines.
3.Open the cover of the pump and empty the filter gasket .
4.Refit the cover
5.Open the valve to the drain outlet
6.Turn the lever to BACKWASH
7. Open the valves to the suction and return lines.
8.Start the pump .Rinse the filter for about 1 to 2 minutes until the water in the sight glass is clear .
NOTE : Any electric heater must be off .
9. Stop the pump
10. Turn the lever to RINSE , start the pump and rinse for about 15~30 seconds. Stop the pump and turn the lever to FILTER . This is the normal operating position .
11. Close the drain outlet valve and start the pump . Switch on the electric heater if any .
Commercial depth sand filter leading by Poolking
Hello, ladies and gentlemen. Today I'd like to introduce Poolking commercial depth sand filter.It is environmental protection and non toxicity.It can be used in large swimming pools, aquariums, aquaculture and other water applications.
----It is best to replace the silica sand of sand filters every 1-2 years for the following reasons:
a During backwashing, the filtration bed volume will expand upwards by 1.2 to 1.3 times. The water flow will drive the filtration layer to flow up and down, causing the filtration material particles to collide with each other. Backwash will let the small sand evacuate.
b.Some silica sands will be welded when the acid and alkali are changed due to insufficient purity;
Therefore, the longer the time, the worse the filtering effect of the sand tank. Since backwashing will consume and take away some sand, we need to replace the sand in the sand tank within the specified period.
Poolking won well-known brand awards for consecutive 3 years
On December 6, the 2021 China Swimming Pool Hot Spring SPA Industry Annual Conference was grandly held.     While commending outstanding brands, it also established a new benchmark in industry.                                                                       Poolking won  Well-known brand awards and Product excellent quality award.
Bigger is not always better when it comes to pool pumps. A pool pump that is too large can hinder filtration and can even damage a pool’s filter and/or heater. It is therefore very important to know the size of a pool before purchasing a pool pump. If there is additional equipment (such as water features) installed into the pool, it will have to be taken it into account when deciding what size pump is going to be purchased. The more equipment is installed into a pool, the more powerful the pump needs to be.
It is important to consult with a pool equipment expert, such as Poolking's Pumps, before buying a pool pump. The team at Poolking will be able to give our customers professional advice regarding the size of the pump they will need to purchase.
no data

Best swimming pool equipment manufacturer - Poolkin will continue for innovative management and excellent quality. Imagination will subvert the future, intelligent manufacturing will lead the era, that's the motto of Poolking!

If you have any question,please contact us.

Contact: Sandy

Email: sandy@poolking.co

Sales Hot line: +86-20-34982303

WhatsApp:+86-13922334815

Add: No. 80, Danan North Road, Dagang Village, Dagang Town, Nansha District, Guangzhou City (temporary business premises)

Copyright © 2025 Guangdong Poolking filtration equipment manufacturing co. Ltd. - www.poolking.co All Rights Reserved. | Sitemap
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service
detect