how to drain pool filter

Author: Poolking - Swimming Pool Equipment Manufacturer

How to Drain Pool Filter

A pool filter is an essential component of your swimming pool because it helps to keep the water clean and clear. Over time, however, your filter will accumulate dirt, debris, and other contaminants that can affect its performance. When this happens, it is important to drain the pool filter and clean it thoroughly so that it can continue to function effectively. In this article, we will show you how to drain your pool filter in five easy steps.

Step 1: Turn off the Pump and Drain the Water

Before you begin to drain your pool filter, you must first turn off the pump that circulates the water in your pool. This is a critical safety precaution because the pump can cause serious injury if it is not turned off before you start working on the filter. Once the pump is off, you can proceed to drain the water from your filter. Depending on the type of filter you have, this task can be accomplished in several ways.

Step 2: Remove the Filter Lid

After you have drained the water from your filter, you can start by removing the filter lid. This is typically located at the top of the filter and is held in place by a series of screws or bolts. You will need to use a wrench or pliers to remove these screws or bolts and lift off the lid.

Step 3: Remove the Filter Cartridge

Once you have removed the filter lid, you can proceed to remove the filter cartridge from the filter housing. The cartridge is typically located in the center of the filter and is held in place by spring clips or other mechanisms. You will need to carefully remove these clips and pull out the cartridge.

Step 4: Clean the Filter Cartridge

With the filter cartridge removed from the filter housing, you can now clean it thoroughly. You can start by hosing it down with a high-pressure hose and then soaking it in a cleaning solution. Be sure to follow the manufacturer's instructions for the cleaning solution and soak the cartridge for the recommended amount of time.

Step 5: Reassemble the Filter

After you have cleaned the filter cartridge, you can proceed to reassemble the filter. Start by replacing the cartridge in the filter housing and securing it with the spring clips or other mechanisms. Next, replace the filter lid and tighten the screws or bolts to hold it in place. Finally, turn the pump back on and check to make sure that the filter is working properly.

Conclusion

Draining your pool filter is an essential task that should be performed regularly to ensure that your pool remains clean and healthy. By following these five easy steps, you can safely and effectively drain and clean your pool filter. With proper maintenance, your pool filter can continue to function effectively for many years to come.