loading

Poolking ผู้ผลิตและซัพพลายเออร์อุปกรณ์สระว่ายน้ำที่ดีที่สุดของคุณโดยมีประสบการณ์มากกว่า 20 ปี    ​​​​​​​   อีเมล: sandy@poolking.co

สินค้า
สินค้า

The principle of ion exchange pure water treatment equipment

Ion exchange pure water treatment equipment is a traditional water treatment process that replaces various anions and cations in water through anion and cation exchange resins. The anion and cation exchange resins are matched in different proportions to form an ion exchange bed system. Exchange shade bed system and ion exchange mixed bed (complex bed) system, and mixed bed (complex bed) system is usually used after reverse osmosis and other water treatment processes to produce ultra-pure water, high-purity water terminal process, he is One of the irreplaceable means currently used to prepare ultra-pure water and high-purity water. The conductivity of the outlet water can be lower than 1uS/cm, and the resistivity of the outlet water can reach more than 1MΩ.cm. According to different water quality and use requirements, the outlet water resistivity can be controlled between 1~18MΩ.cm. It is widely used in the preparation of industrial ultrapure water and high-purity water such as ultrapure water for electronics and electric power, chemical industry, electroplating ultrapure water, boiler feed water and ultrapure water for medicine.

Using yin bed, yang bed, and mixed bed, the deionized ultrapure water treatment equipment we usually call uses a reverse osmosis host plus a two-stage mixed bed, and uses an ion exchange method to remove cations and anions in the water in an ionic state. Sodium chloride (NaCl) represents inorganic salts in water. Rinse the resin with clean water first, then alternately soak the exchange column with 4-5% HCl and NaOH for 2-4 hours, rinse with a large amount of clean water between acid and alkali until the effluent is close to neutral, and repeat this for 2-4 hours. 3 times, each time the amount of acid and alkali is twice the volume of the resin. The last treatment should be carried out with 4~5% HCl solution, drain the acid solution, rinse with water until it is neutral, and then use it.

Pretreatment of anion exchange resin: first rinse the resin with clean water, then alternately soak the exchange column with 4 ~ 5% NaOH and HCl for 2 ~4 hours, rinse with a large amount of water between alkali and acid until the effluent is close to neutral, repeat this 2~3 times, each time the amount of acid and alkali is twice the volume of the resin. The last treatment should be carried out with 4~5% NaOH solution, drain the lye with water, rinse with water until it is neutral, and then use it. Hybrid ion exchanger regeneration process: After the ion exchange resin has been used for a period of time, the adsorbed impurities are close to saturation, and regeneration treatment is required to restore its original composition and performance.

At present, the commonly used chemical agent acid-base method for domestic resin regeneration restores the exchange capacity of the failed resin. The use of acid is usually HCl or H2SO4, and the deployment concentration is about 3-5%; the use of alkali is generally NaOH, and the deployment concentration is 3-5%. About 5%. 1. Backwash stratification: The backwash flow rate is 10 m/h, and the backwash time is 15 minutes. The stratification effect is judged by whether the interface between the positive and negative resin layers is clear after settling. 2. Enter the regeneration solution: Pump the required regeneration solution in about 20 minutes, soak for 2-3 hours and then use the method of positive washing, rinse with anion resin until the alkalinity of the effluent is about PH=8-9, and rinse with cation resin Until the acidity of the effluent is around PH=5-6.

3. Mixing: Enter nitrogen from the bottom (compressed air, vacuum pumping, etc. can also be used) for mixing, the inlet pressure is 0.1~0.15MPa, the inlet volume is 2.5~3.0m3/(m2·min), and the mixing time is generally 5 ~10 minutes, and the end point is that the resin in the column is fully mixed. Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..

ติดต่อกับพวกเรา
บทความที่แนะนำ
ข่าว แอปพลิเคชัน การขนส่งสินค้า
Poolking คว้ารางวัลแบรนด์ดัง 3 ปีซ้อน

เมื่อวันที่ 6 ธันวาคม การประชุมประจำปีอุตสาหกรรมสปาน้ำพุร้อนสระว่ายน้ำจีนประจำปี 2021 จัดขึ้นอย่างยิ่งใหญ่ นอกจากจะยกย่องแบรนด์ที่โดดเด่นแล้ว ยังสร้างมาตรฐานใหม่ให้กับอุตสาหกรรมอีกด้วย Poolking ได้รับรางวัลแบรนด์ดังและรางวัลคุณภาพผลิตภัณฑ์ยอดเยี่ยม
ก. ขั้นแรก คุณสามารถบอกขนาดสระ เช่น ความกว้าง ความยาว และความลึกได้ ระยะเวลาหมุนเวียนน้ำคือ 4 ชั่วโมง จากนั้นเราสามารถใช้ปริมาตรสระหารด้วย 4 เพื่อทราบอัตราการไหล จากนั้นเราจะสามารถเลือกรุ่นที่เหมาะสมกับเครื่องกรองทรายและปั๊มได้ ข. โดยทั่วไปแล้ว สามารถติดตั้งไฟสระว่ายน้ำได้ 4 เมตร ปลายสระทั้งสองด้านสามารถติดตั้งบันไดได้ สามารถเลือกอุปกรณ์กรองพื้นฐานได้ตามวิธีการข้างต้น ส่วนอุปกรณ์เสริมอื่นๆ สามารถติดตั้งได้ตามสภาพแวดล้อมและความต้องการใช้งาน
----ใช่ ทำได้ ทรายซิลิกาส่วนใหญ่ใช้สำหรับการกรอง ในขณะที่ถ่านกัมมันต์ส่วนใหญ่ใช้สำหรับการดูดซับ ทรายซิลิกามีประสิทธิภาพสำหรับความต้องการคุณภาพน้ำที่สูงขึ้น เมื่อใช้ร่วมกัน ควรวางทรายซิลิกาไว้ชั้นล่างสุด แล้วจึงเติมถ่านกัมมันต์ลงบนทราย แต่การใช้วัสดุกรองสองชนิดจะมีต้นทุนสูงกว่ามาก
เมื่อพูดถึงปั๊มสระว่ายน้ำ ขนาดใหญ่ไม่ได้หมายความว่าจะดีกว่าเสมอไป ปั๊มสระว่ายน้ำที่มีขนาดใหญ่เกินไปอาจขัดขวางการกรองน้ำ และอาจทำให้ตัวกรองและ/หรือเครื่องทำน้ำอุ่นเสียหายได้ ดังนั้น การทราบขนาดของสระว่ายน้ำก่อนซื้อปั๊มจึงเป็นสิ่งสำคัญอย่างยิ่ง หากมีการติดตั้งอุปกรณ์เพิ่มเติม (เช่น น้ำพุ) ลงในสระ จะต้องพิจารณาขนาดปั๊มที่จะซื้อ ยิ่งติดตั้งอุปกรณ์ในสระมากเท่าไหร่ ปั๊มก็ยิ่งต้องการกำลังมากขึ้นเท่านั้น สิ่งสำคัญคือควรปรึกษาผู้เชี่ยวชาญด้านอุปกรณ์สระว่ายน้ำ เช่น Poolking's Pumps ก่อนซื้อปั๊มสระว่ายน้ำ ทีมงานของ Poolking จะสามารถให้คำแนะนำอย่างมืออาชีพแก่ลูกค้าเกี่ยวกับขนาดของปั๊มที่ลูกค้าต้องการซื้อ
เครื่องกรองทรายความลึกเชิงพาณิชย์ชั้นนำจาก Poolking

สวัสดีคุณผู้หญิงและคุณผู้ชายทุกท่าน วันนี้ฉันอยากจะแนะนำเครื่องกรองทรายความลึกเชิงพาณิชย์ Poolking ซึ่งเป็นเครื่องกรองทรายที่เป็นมิตรกับสิ่งแวดล้อมและไม่เป็นพิษ สามารถใช้ได้กับสระว่ายน้ำขนาดใหญ่ พิพิธภัณฑ์สัตว์น้ำ การเพาะเลี้ยงสัตว์น้ำ และการใช้งานทางน้ำอื่นๆ
ตัวกรองทรายของ Poolking รับประกัน 3 ปีสำหรับตัวกรองไฟเบอร์กลาส และ 2 ปีสำหรับตัวกรองพลาสติก ในช่วงระยะเวลารับประกัน หากชิ้นส่วนตัวกรองชำรุดเสียหายใดๆ เราจะพิจารณาปัจจัยต่างๆ ตามภาพถ่ายหรือวิดีโอ จากนั้นเราจะเสนออะไหล่ทดแทนให้ฟรี หากตัวกรองเสียหายหนัก เราจะจัดหาอันใหม่ให้ ปั๊มและไฟรับประกัน 1 ปี วิธีการเช่นเดียวกับตัวกรอง
สภาพแวดล้อมการผลิตคุณภาพดีที่สุด โรงงานซัพพลายเออร์

Poolking สภาพแวดล้อมการผลิตคุณภาพดีที่สุด โรงงานซัพพลายเออร์


Poolking สภาพแวดล้อมการผลิตคุณภาพดีที่สุด โรงงาน
ไม่มีข้อมูล

ผู้ผลิตอุปกรณ์สระว่ายน้ำที่ดีที่สุด - Poolkin จะยังคงรักษาการบริหารจัดการที่เป็นนวัตกรรมและคุณภาพที่เป็นเลิศต่อไป จินตนาการจะพลิกโฉมอนาคต การผลิตอัจฉริยะจะเป็นผู้นำยุคสมัย นั่นคือคติประจำใจของ Poolking!

หากคุณมีคำถามใด ๆ โปรดติดต่อเรา

ติดต่อ: แซนดี้

อีเมล: sandy@poolking.co

สายด่วนฝ่ายขาย: +86-20-34982303

วอทส์แอป: +86-13922334815

เพิ่ม: ไม่ 80, ถนน Danan North, หมู่บ้าน Dagang, เมือง Dagang, เขต Nansha, เมืองกวางโจว (สถานที่ประกอบธุรกิจชั่วคราว)

ลิขสิทธิ์ © 2025 Guangdong Poolking filtration equipment manufacturing co. บริษัท จำกัด - www.poolking.co สงวนลิขสิทธิ์ 1966. | แผนผังเว็บไซต์
ติดต่อเรา
whatsapp
ติดต่อฝ่ายบริการลูกค้า
ติดต่อเรา
whatsapp
ยกเลิก
Customer service
detect