how to open intex pool filter

Intex swimming pools are becoming increasingly popular among homeowners in recent times, given their affordability and the ease of installation. These pools are available in various sizes and designs, and they come with an easy-to-use filter pump that helps keep the pool water clean.

However, you may face a challenge when it comes to opening your Intex pool filter for the first time. If you don't know how to open the filter correctly, you may end up damaging it and reducing its lifespan. Therefore, this article will guide you on how to open an Intex pool filter, safely and efficiently, in five simple steps.

Step One: Turn off the Power Supply

Before you start opening the Intex pool filter, you must turn off the power supply to the filter pump. This step is crucial to ensure that no electric current is running through the system while you work on it. You can switch off the power by unplugging it from the power outlet or turning off the power switch.

Step Two: Remove the Hose Attachments

The next step is to remove the hose attachments connecting the filter pump to the pool. Before you remove the attachments, ensure that the pool water level is below the connections to prevent water from gushing out.

To remove the hose attachments, twist and loosen the hose clamps using pliers or a screwdriver, depending on the type of hose clamps you have. Once the clamps are loose, remove the hoses from the inlet and outlet ports of the filter pump.

Step Three: Open the Filter Pump Housing

After removing the hose attachments, you can proceed to open the filter pump housing. The filter pump housing comprises two parts – the motor housing and the filter housing.

To open the motor housing, unscrew the bolts securing the housing cover and lift off the cover. Next, unscrew the bolts securing the filter housing to the motor housing and carefully lift off the housing.

Step Four: Access the Filter Cartridge

Once you have opened the filter pump housing, you can access the filter cartridge. The filter cartridge is a vital component of the Intex pool filter that traps dirt, debris, and other contaminants in the pool water.

To access the filter cartridge, unscrew the air relief valve and lift off the filter cover. Next, remove the filter cartridge and rinse it with a garden hose to remove any dirt and debris.

Step Five: Reassemble the Filter Pump

After cleaning the filter cartridge, you can reassemble the filter pump in reverse order. First, reinstall the filter cartridge and secure the filter cover by screwing the air relief valve. Next, reattach the filter housing to the motor housing and secure it with bolts.

After securing the filter housing, reinstall the motor housing cover and secure it with bolts. Finally, reattach the hose connections and tighten the hose clamps with pliers or a screwdriver.

Conclusion

Opening an Intex pool filter is a straightforward process that you can do DIY style. The process only requires you to follow the above steps and take some precautions to ensure safety. With these steps, you can open your Intex pool filter with confidence, knowing that you are doing it correctly.