how to make a pool filter system

.

How to Make a Pool Filter System

Summer is here, and it's time to take your pool game to the next level. Having a properly-functioning pool filter system is essential to keeping your pool water clean and clear. With a few simple materials and some elbow grease, you can create your own pool filter system in no time. Follow these easy steps to make your own pool filter system and enjoy a sparkling clean pool all season long.

Materials Needed

Before we dive in, let's take a look at the equipment and materials you'll need to make your own pool filter system:

- A 50-gallon plastic tub

- A submersible pump

- PVC pipe

- Hose clamps

- PVC elbows

- Pool filter sand

- Plastic netting or a mesh bag

- Hose adapter

- Teflon tape

Step 1: Preparing the Tub

The first step in making a pool filter system is preparing the plastic tub. Begin by drilling a hole in the center of the bottom of the tub large enough for the submersible pump. Next, cut two holes in each corner of the top of the tub for the PVC pipes. Finally, glue a PVC elbow onto the bottom of each hole, pointing down toward the bottom of the tub.

Step 2: Connecting the PVC Pipes

Now that the PVC elbows are in place, it's time to connect the PVC pipes. Cut four pieces of PVC pipe to the desired length, and connect them to the elbows. Use hose clamps to secure the pipes to the elbows. The pipes should be long enough to extend above the top of the tub.

Step 3: Adding the Pool Filter Sand

Once the PVC pipes are connected, it's time to add the pool filter sand. This sand is essential to filter out debris and bacteria from the pool water. Pour the sand into the plastic tub, and use a plastic netting or mesh bag to contain the sand. Be sure to pack the sand tightly into the bag.

Step 4: Installing the Submersible Pump

Now it's time to install the submersible pump. Thread the pump's power cord through the hole in the bottom of the tub. Set the pump on top of the sand and press down firmly to secure it in place.

Step 5: Connecting the Hose Adapter

The final step in making a pool filter system is connecting the hose adapter to the PVC pipes. Use Teflon tape to seal the threads of the hose adapter, and screw it onto the PVC pipes. Connect the hose to the adapter, and you're ready to go!

Using Your Pool Filter System

Once your pool filter system is in place, it's important to use it properly to keep your pool water clean and clear. Turn on the submersible pump, and the water will be drawn through the sand filter system. The sand will trap debris and bacteria, leaving clean water to return to the pool.

Maintenance Tips

To keep your pool filter system working properly, it's important to perform regular maintenance. Backwashing is the process of reversing the flow of water through the sand filter to flush out any debris that may have accumulated. You should backwash your pool filter system every two weeks.

Conclusion

Making a pool filter system is an easy and inexpensive way to keep your pool water clean and clear. With a few simple materials and some basic tools, you can create your own pool filter system in just a few hours. Remember to perform regular maintenance, and you'll enjoy a sparkling clean pool all summer long.