how to install a intex pool filter

If you have recently purchased an Intex above ground pool, you have made a good choice. These pools are easy to install and provide hours of fun for the entire family. However, with any pool comes the need for maintenance. One of the most important pieces of equipment for keeping your pool clean and clear is the Intex pool filter. Here's how to install it properly.

Subheading 1: Purchase the Right Filter

Before installing your Intex pool filter, you need to make sure you have the right one. Intex produces several types of filters that are compatible with their above ground pools. The two main types are sand filters and cartridge filters. Sand filters are larger and more expensive, but they are also more powerful and require less maintenance. Cartridge filters are smaller and less expensive, but they need to be cleaned more frequently. Consider the size of your pool and the amount of debris that gets into it when deciding which type of filter to purchase.

Subheading 2: Set Up the Pump and Filter Combo

Before installing your filter, you need to set up the pump and filter combo. This involves connecting the hoses and making sure the pump is securely attached to the pool. Start by placing the pump and filter combo in a location near the pool where it will not be disturbed. Attach the hoses to the inlet and outlet ports on the pump and filter combo. Make sure the hoses are secure and tight to prevent any leaks. Finally, attach the other end of the hoses to the appropriate ports on the pool.

Subheading 3: Install the Strainer Basket

The strainer basket is an essential part of your Intex pool filter. It catches large debris, such as leaves and twigs, before they enter the filter. To install the strainer basket, remove the lid from the pump and filter combo. Insert the strainer basket into the opening and make sure it fits securely. Replace the lid and make sure it is tightened securely.

Subheading 4: Prime the Pump

To ensure the best performance from your pool filter, you need to prime the pump. Priming the pump involves removing all the air from the hoses and the pump system. This ensures that the water can flow freely through the filter. To prime the pump, turn off the pool's circulation. Fill the pump and filter combo with water using a garden hose. Once the pump is full of water, turn it on and let it run for a few minutes. This will remove any air bubbles from the system.

Subheading 5: Test the System

Now that your Intex pool filter is installed, you need to test the system to make sure it's working properly. Turn on the pool's circulation and watch the water flow. Make sure water is flowing freely through the filter and out to the pool. Check the filter for any leaks or cracks. If everything looks good, you're done! Your Intex pool filter is now installed and ready to keep your pool clean and clear.

In conclusion, installing an Intex pool filter is a straightforward process that can be completed by anyone. With a few simple steps, you can ensure that your pool stays clean and clear all season long. Remember to purchase the right filter, set up the pump and filter combo, install the strainer basket, prime the pump, and test the system. With these steps completed, your pool will be ready for hours of summer fun.