how do i change my pool filter

Author: Poolking - Swimming Pool Equipment Manufacturer

How Do I Change My Pool Filter? A Simple Step-by-Step Guide

If you're a pool owner, one of the most important aspects of maintaining your pool is ensuring your pool filter is clean and functioning properly. Here's a step-by-step guide on how to change your pool filter.

1. Determine the Type of Pool Filter You Have

The first thing you need to do before changing your pool filter is to determine what type of filter you have. There are three types of pool filters: sand, cartridge, and DE (diatomaceous earth). Each filter has its own unique maintenance requirements.

2. Gather Your Tools and Equipment

Once you have determined the type of pool filter you have, the next step is to gather your tools and equipment. You will need:

- The Replacement Pool Filter

- Screwdriver (Phillips or Flathead)

- Pool Filter Cleaner

- Garden Hose

- Pipe Thread Sealant

3. Turn off the Pool Pump

Before you start changing your pool filter, it's important to turn off the pool's pump. This will prevent water from flowing into the filter while you are working on it.

4. Disconnect the Old Filter

The next step is to disconnect the old pool filter. Start by removing the old filter's clamp. If it's a sand filter, use a wrench to loosen the nuts on either side of the filter. If it's a cartridge filter, squeeze the filter's release tabs and pull the filter out of the housing. If it's a DE filter, remove the pump from the housing and separate the housing from the filter.

5. Clean the Filter Housing

Now that you have removed the old filter, it's time to clean the filter housing. Use a pool filter cleaner and a garden hose to clean the inside of the housing. Make sure all debris and dirt are removed before continuing.

6. Install the New Pool Filter

Once the filter housing is clean, it's time to install the new pool filter. Start by applying pipe thread sealant to the threads on the new filter. If it's a sand filter, pour sand into the filter until it's half full, replace the diffuser, and fill the rest of the filter with sand. If it's a cartridge filter, simply insert the new filter into the housing. If it's a DE filter, replace the old DE grids with new ones.

7. Reconnect the Filter Housing

Now that the new pool filter is installed, it's time to reconnect the filter housing. Start by placing the housing back into the filter, making sure it's properly aligned. Tighten the nuts on either side of the filter if it's a sand filter or reattach the pump to the housing if it's a DE filter.

8. Turn On the Pool Pump

The final step is to turn on the pool pump and make sure everything is working correctly. If everything's in order, your pool filter is now ready to keep your pool sparkling clean.

In conclusion, changing your pool filter is an essential part of maintaining your pool's water quality. By following these easy steps, you can easily change your filter and ensure that your pool remains clean and clear all season long. Happy swimming!