how to clean jandy pro series pool filter

Author: PoolKing - Pool Sand Filter Manufacturers

How to Clean Jandy Pro Series Pool Filter

Summer is here and nothing beats lounging by the pool on a hot day. But a dirty pool filter can quickly turn your fun in the sun into a nightmare. The Jandy Pro Series pool filter is a popular choice for pool owners, and for good reason. It’s efficient, durable, and easy to maintain. In this article, we’ll show you how to clean your Jandy Pro Series pool filter to keep your pool sparkling all season long.

Why Clean Your Jandy Pro Series Pool Filter?

The pool filter is an essential part of your pool’s system. It removes dirt, debris, and other contaminants from the water, keeping it clean and healthy for swimming. Over time, the filter can become clogged with dirt and debris, reducing its effectiveness. A dirty filter can also cause your pump to work harder, costing you money in energy bills and potentially damaging the pump. By cleaning your Jandy Pro Series pool filter regularly, you’ll prevent these problems and extend the life of your filtration system.

What You Will Need to Clean Your Jandy Pro Series Pool Filter

- Jandy Pro Series pool filter

- Garden hose

- Cleaning solution (optional)

Step-by-Step Guide to Clean Your Jandy Pro Series Pool Filter

Step 1: Shut off the System

Before you begin cleaning your pool filter, turn off the system at the circuit breaker. This will prevent the pump from running while you’re working on the filter.

Step 2: Release the Pressure

Next, you’ll need to release the pressure from the filter. This is important to prevent damage to the filter and ensure a thorough cleaning. To do this, locate the air relief valve on the top of the filter and turn it counterclockwise until you hear air escaping. Once the air has been released, turn the valve back clockwise.

Step 3: Remove the Filter

Now it’s time to remove the filter from the housing. Start by loosening the band clamp that secures the filter to the housing. Once the clamp is loose, carefully lift the filter out of the housing.

Step 4: Rinse the Filter

With the filter removed, use a garden hose to rinse off any loose debris. Be sure to rinse the filter thoroughly, paying special attention to the pleats to ensure all dirt and debris is removed.

Step 5: Clean the Filter

If your filter is particularly dirty, you may want to use a cleaning solution to help remove stubborn debris. Be sure to follow the manufacturer’s instructions for the solution and allow the filter to soak for the recommended amount of time.

Step 6: Rinse Again and Reinstall

After cleaning the filter, use the garden hose to rinse off any remaining cleaning solution. Once the filter is clean, replace it in the housing and secure it with the band clamp.

Step 7: Restart the System

Now that the filter is clean and back in place, it’s time to restart the system. Turn the circuit breaker back on and let the pump run for a few minutes to ensure everything is working properly. Once you’re satisfied that the system is running smoothly, go ahead and take a dip in your sparkling clean pool.

Conclusion

Cleaning your Jandy Pro Series pool filter is one of the most important steps you can take to maintain your pool. By following these simple steps, you’ll keep your filter working efficiently and extend the life of your pool’s system. Happy swimming!