how to hook up a cartridge pool filter

Author: PoolKing - Pool Sand Filter Manufacturers

How to Hook Up a Cartridge Pool Filter

Installing and setting up a cartridge pool filter can be a daunting task, especially if you do not have any prior experience. However, with the right guidelines and tools, it is possible to complete this task quickly and get your pool up and ready for use.

This article will provide you with step-by-step instructions on how to hook up a cartridge pool filter. We will explore what a cartridge pool filter is, what you need to install it, and how to set it up correctly.

What is a cartridge pool filter?

A cartridge pool filter is a type of filtration system that uses one or more cartridges to trap and remove dirt and debris from the water in your pool. Unlike sand or DE (Diatomaceous Earth) filters, a cartridge pool filter does not require backwashing or messy disposal of filter media.

What do you need to set up a cartridge pool filter?

Before you begin setting up your cartridge pool filter, you need to have the following tools and equipment:

- Cartridge pool filter: This is the main component of the system.

- PVC Pipes: You will need a few pieces of PVC pipes to connect the pump to the filter and the filter to the pool.

- PVC fittings: This includes elbows, tees, couplings, and other connectors needed to join the PVC pipes.

- A pool pump: A pool pump helps to circulate water from the pool through the filter and back to the pool.

- A skimmer: A skimmer helps to remove floating debris from the surface of the pool.

- Teflon tape: This is used to seal the threads of the PVC fittings to prevent leaks.

Step-by-step Guide on How to Set up a Cartridge Pool Filter

Step 1: Choose the Location for the Filter

The first step to setting up a cartridge pool filter is choosing a suitable location. Ideally, the filter should be placed near the pump and in a location that is easy to access for maintenance purposes.

Step 2: Assemble the PVC Pipes and Fittings

Using the PVC pipes and fittings, connect the filter to the pump and the pump to the pool. Use Teflon tape to seal the threads of the fittings.

Step 3: Install the Skimmer

The skimmer is installed near the edge of the pool and connected to the PVC pipe that leads to the pump. Make sure that the skimmer is level with the pool's water level.

Step 4: Connect the Pump to the Filter

Attach the PVC pipe leading from the pump to the filter. Tighten the fittings and ensure that they are secure.

Step 5: Connect the Filter to the Pool

Attach the PVC pipe leading from the filter to the pool. Again, ensure that the fittings are tight and secure.

Step 6: Prime the Pump

Before turning on the pump, prime it by adding water to the pool pump's housing. Turn the pump on and let it run for a few minutes to ensure that there are no leaks.

Step 7: Clean and Install the Cartridge Filter

Remove the filter cartridge and clean it thoroughly using a hose. Once clean, put the cartridge back into the filter housing and secure it according to the manufacturer's instructions.

Step 8: Start the System

Turn on the pump and let the system run for a few minutes. Check for any leaks and ensure that the water is circulating correctly.

Conclusion

Setting up a cartridge pool filter can seem like a daunting task, but with the right tools and guidelines, it is a straightforward process. By following the steps above, you can enjoy clean and clear water in your pool all season long. Remember to regularly clean and replace the filter cartridge to maintain the effectiveness of the system.