how to add earth to pool filter

As a pool owner, it is important to keep the pool clean and well-maintained to keep it safe and enjoyable for swimmers. The pool filter is critical in keeping the water clean by removing contaminants and debris from the water, but did you know that you can enhance the filtration process by adding earth to the filter? In this article, we will discuss how to add earth to the pool filter, its benefits, and some tips to ensure you do it properly.

What is Earth for Pool Filters?

Also known as diatomaceous earth, earth for pool filters is a natural filtration media made from the fossilized remains of diatoms, a type of algae. It is a fine, powdery substance that acts as a sieve, catching even the smallest particles that other pool filters may miss. Earth for pool filters is an effective and eco-friendly alternative to other filtration media like sand and cartridge filters.

Benefits of Using Earth for Pool Filters

Using earth for pool filters has several benefits, including but not limited to:

1. Efficient Filtration: Earth for pool filters can remove even microscopic particles, leaving your pool water crystal clear.

2. Long-lasting: Earth for pool filters can last up to six months, reducing the need for frequent filter replacements.

3. Environmentally Friendly: Earth for pool filters is a sustainable and renewable resource, making it a more environmentally friendly option than other filtration media.

4. Cost-effective: While diatomaceous earth filters may have a higher upfront cost, they can save you money in the long run due to their efficiency and long-lasting lifespan.

5. Easy to Replace: Adding earth to your pool filter is a hassle-free process, and the replacement process is easy too.

How to Add Earth to the Pool Filter?

Follow these simple steps to add earth to your pool filter:

1. Turn Off the Pool Pump: Before adding earth to the filter, make sure to turn off the pool pump to avoid any accidents.

2. Open the Filter: Open the top of the filter to access the filter grids.

3. Clean the Filter Grids: Using a hose, rinse off the filter grids thoroughly to remove any debris or dirt.

4. Add Earth: Add one scoop of earth for pool filters per every square foot of filter space.

5. Distribute Evenly: Using a brush, distribute the earth evenly across the filter grids.

6. Close the Filter: After distributing the earth, carefully return the filter foundation back into the filter and tighten the screws back in place.

7. Turn on the Pump: Once the filter is fully assembled, turn on the pool pump and allow it to run for 2-3 minutes to check for any leaks.

Tips to Keep in Mind While Adding Earth To Pool Filter:

Here are some tips to keep in mind while adding earth to your pool filter:

1. Select the Right Type of Earth: There are various types of earth available in the market, and it's important to choose the one that is suitable for your filter. Hence, read the instructions given in the package to ensure you are using the right type of earth.

2. Avoid Overloading: Make sure not to overload the filter with too much earth or too little; read the instructions to determine the correct amount to use.

3. Wear Protective Gear: While adding earth, wear protective gear like goggles, gloves, and a mask to avoid getting the powder in your eyes, nose or mouth.

4. Replace the Earth Every Six Months: Ensure to replace the earth every six months or according to the instructions given in the package.

Conclusion:

In conclusion, adding earth to your pool filter can significantly improve your pool's filtration process. When done correctly, it can keep your pool crystal clear, cost-effective, and environmentally friendly. By following the tips mentioned above, you can ensure you are adding the earth to the pool filter in the right way, and also, extending the lifespan of your pool filter. Try it out on your pool today and see the difference yourself!