how to release pressure from pool filter

Author: PoolKing - Pool Sand Filter Manufacturers

How to Release Pressure from Pool Filter

So, you notice that your pool filter pressure gauge is reading higher than normal. This may be noticeable because your pool is not as clear as it once was, or you are just having trouble with your pool equipment. This is when it is time to release the pressure from your pool filter.

What is Pool Filter Pressure

Before we get into the proceedings of releasing pool filter pressure, let us understand what it is. Basically, the pressure gauge on your pool filter measures the resistance of the water flowing through the filter. When the PSI (pounds per square inch) increases, it indicates that your filter is getting dirty or clogged, reducing the water flow, and making your pump work harder. This is when you need to release the pressure from your pool filter.

The Importance of Releasing Pool Filter Pressure

It is important to release the pressure from your pool filter regularly. If the PSI continues to rise, it can damage your pool pump and other equipment, and your pool water may not be as clean as it should be. Additionally, releasing pressure from your pool filter also allows you to clean or replace the filter as needed.

Here are five simple steps you can follow to release the pressure from your pool filter:

Step 1: Turn Off Your Pool Pump

Before doing anything else, make sure to turn off your pool pump. This will prevent water from flowing through the filter during the process, and it will help in releasing the pressure from the pool filter.

Step 2: Turn Air Release Valve

Locate the air release valve located at the top of your pool filter. Once located, turn the valve counterclockwise until you hear the hissing sound of air escaping. This is an indication of air being released from the filter.

Step 3: Loosen the Filter Lid

After releasing the air from the filter, switch off the pump and loosen the filter lid. If the filter lid is tightly secured, and there is a lot of pressure, you can use a strap wrench to open it. Once loosened, lift the lid off the filter.

Step 4: Clean or Replace Filter

Once the lid is removed, you should see your filter. This is the perfect opportunity to clean or replace your filter, depending on its condition. If there is buildup, rinse the filter with a hose or use a filter cleaning solution. If the filter looks worn out, it may be time for a replacement.

Step 5: Reassemble the Filter

After cleaning the filter or replacing it, make sure that it is assembled correctly and tightly secured. Also, it is essential to double-check that the air release valve, filter lid, and other equipment have been reconnected as needed. Once this is done, you can start the pump and watch as the pressure gauge indicates a drop in pressure.

Final Thoughts

Releasing pressure from your pool filter is necessary for your pool's well-being, and it will prevent the pool pump and other equipment from being damaged. Follow the steps mentioned above for maintaining your pool filter and keeping your pool pristine. Remember to clean your filter regularly, replace it when needed, and always check for air in the pool filter to ensure it is working correctly. Regular maintenance will help you enjoy your pool for years to come.