how to open swimming pool filter

Author: PoolKing - Pool Sand Filter Manufacturers

How to Open Your Swimming Pool Filter for the Season

As spring arrives, it's time to start thinking about opening up your pool for the season. One of the most important things to do is to get your swimming pool filter up and running. Here are some steps to take to get your filter ready for a summer of fun.

1. Start by Cleaning Out Your Filter

When you first remove the cover from your pool, you'll need to do a thorough cleaning of the area around the pool. This includes cleaning out your filter. If you have a cartridge or DE filter, remove the filter element and wash it down with a garden hose. Make sure you don't use too much water pressure, or you may damage the filter. If you have a sand filter, you'll need to do a backwash to clean out any accumulated debris.

2. Inspect Your Filter for Damage

Before you start up your pool filter, take a close look at it to see if there is any damage. Look for cracks or other signs of wear and tear. If you find any damage, you'll need to repair or replace the filter before proceeding.

3. Check Your Pump and Motor

The next step is to check the pump and motor that power your swimming pool filter. Make sure the pump basket and impeller are clear of any debris, and check the motor to make sure it's running smoothly. If you notice any unusual noises or vibrations, you may need to schedule a repair or replacement.

4. Reassemble Your Filter

Once you've cleaned and inspected your filter, it's time to reassemble it. Make sure all the parts are in the right place and securely fastened. If you have a cartridge or DE filter, make sure the filter element is seated properly. If you have a sand filter, add the correct amount of sand.

5. Prime the Pump

Before you start up your filter, you'll need to prime the pump. This involves filling the pump housing with water so that it can start pumping water through the filter. You can usually do this by opening the air relief valve and filling the pump housing with a garden hose.

6. Turn On Your Filter

Once you've primed the pump, turn on your filter and watch for leaks or other issues. If everything seems to be running smoothly, you're all set! You can now start enjoying your clean, clear pool.

In conclusion, opening your swimming pool filter for the season can seem like a daunting task, but it doesn't have to be. By following these steps, you'll be able to get your filter up and running in no time. With proper maintenance and care, your swimming pool filter can help keep your pool sparkling clean all summer long.