how to install pool filter balls

Author: PoolKing - Pool Sand Filter Manufacturers

How to Install Pool Filter Balls

Pool filter balls are an alternative to traditional sand or cartridge filters. They are environmentally friendly, less expensive, and can filter out debris as small as 1 micron. If you're interested in using filter balls for your pool, this article will guide you through the steps.

1. Purchase the Correct Amount of Pool Filter Balls

Before installing pool filter balls, you need to purchase the right amount of them. The amount needed will depend on the size of your pool and the type of filter you have. Pool filter balls are sold in packages that usually range from 1 to 8 pounds. A good rule of thumb is to use 1 pound of filter balls per 10,000 gallons of water. If you're unsure, check with the manufacturer of your pool filter or consult a professional.

2. Clean Your Pool Filter

Before installing filter balls, it's essential to have a clean pool filter. Clean the filter according to the manufacturer's instructions. If you're using a sand filter or a cartridge filter, you'll need to remove the sand or cartridge and clean the inside of the tank with a hose and brush. For DE filters, you'll need to backwash the filter and then add fresh DE powder.

3. Add the Pool Filter Balls

Once the pool filter is clean, you can add the pool filter balls. Open the package and pour the balls into the filter tank. Depending on the size of your filter, you may need to add the balls in stages. After adding the balls, check the manufacturer's instructions to see if anything else needs to be done.

4. Turn on the Pool Pump and Run the System

After adding the filter balls, turn on the pool pump and run the system for at least eight hours. This will allow the balls to settle in and begin filtering the water. During this time, you should also check to make sure the filter is working correctly. If you notice any issues, consult the manufacturer's instructions or contact a professional.

5. Maintain the Pool Filter Balls

To ensure your filter balls continue to work correctly, you should maintain them regularly. Every six months, you should remove the balls and wash them with a hose. Make sure to use a low-pressure setting to avoid damaging the balls. After washing, you can put them back in the filter.

Conclusion

Pool filter balls are an environmentally friendly and cost-effective alternative to traditional sand or cartridge filters. They're easy to install and can filter out debris as small as 1 micron. To install pool filter balls, you'll need to purchase the correct amount, clean your pool filter, add the balls, run the system for at least eight hours, and maintain the balls regularly. By following these steps, you'll have clean and clear pool water for your swimming pleasure.