How to determine whether the swimming pool is leaking and how to deal with the swimming pool leaking

How to determine whether there is water leakage in the swimming pool and how to deal with the water leakage in the swimming pool? It is so large, the way to test for water leakage is to fill a bucket with the same water as the swimming pool at night when the filter circulation system is on and off, and fix it on a still level in the swimming pool so that the bucket The inner liquid level is at the same height as the swimming pool water level. After one night of standing still, the difference between the water level of the bucket and the swimming pool water level is calculated the next morning, and then multiplied by the area of ​​the swimming pool to know the amount of water leakage. If you change it, you can calculate the amount of water leakage per unit time. Try to compare the amount of water leakage per unit time to determine the timing of repair. If there is a lot of water leakage when the filter circulation system is turned on, the water leakage occurs in the filter pump. The outlet pipeline, on the contrary, if there is a lot of water leakage when the filtration circulation system is closed, the swimming pool leakage occurs in the swimming pool body itself. If the water leakage occurs in the inlet pipeline of the filter pump, it can be removed Detectors, filters, swimming pool outlets have found continuous air presence: 1. Leakage of the swimming pool pipeline: It can be found that the pressure gauge on the filter is very unstable. If it occurs in the parts, when the power is turned off, the leaking parts will drip or get wet. Otherwise, it will be on the water level of the swimming pool. The underground pipeline runs to the middle of the filter pump room. 2. Leakage of the pipeline at the outlet end of the swimming pool: When the filter pump is running, the pipeline or components can be found to have water jets, otherwise, it is in the underground pipeline on the water level of the swimming pool. 3. Leakage of the swimming pool body itself: there are three parts: the water surface cleaner, the pool itself, and the underground pipeline below the water level of the swimming pool. In the water surface cleaner part, dyes or pH indicator agents can be dripped into the interior to determine the flow direction of the leaking part. For the pool body itself, use diving equipment to carefully search for cracks inside the pool or use a current leak detector to find the leak point in the pool. If it is in the underground pipeline below the pool water level, you must use professional swimming pool chemicals In order to effectively grasp the scope of leakage.

When cracks appear in the swimming pool and cause water leakage in the swimming pool, the reasons for the cracks should be analyzed first. On the one hand, the foundation should be treated in detail to ensure that the main structure will not continue to produce uneven settlement. On the other hand, carry out waterproof and plugging construction on the swimming pool. Integrating various factors and combining the characteristics of waterproof materials, the swimming pool should be treated in the following aspects: 1. Crack plugging, waterproof treatment 2. Waterproof layer including materials, etc. 3. Treatment of inner corners, including whether the design of inner corners is reasonable, etc. wait Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..