The swimming pool is divided into adult and children's pools, the pools are higher than the operation room. Therefore, the pipelines are complicated, also as the equipment turning on or off. This makes the swimming pool operators must be responsible for each day. If it is not handled properly, the equipment will be damaged and the pool water will be wasted.
First, turn on all the air switch of the electric control box, check all equipment If they are in normal position or whether the pumps, valves, and pipes are leaking.
1. Evacuate the air from all circulation pumps. Then open the valve of the swimming pool suction pipe ,the main valve of the sand filter, the upper check valve of the swimming pool and open the upper suction inlet. Turning on a circulation pump to start the dust vacuuming. After the vacuuming, immediately close above valves, the suction inlet, and turn off the circulation pump.
2. Open the valve of the swimming pool suction pipe, lower check valve of the swimming pool and open the lower suction inlet. Before vacuuming the swimming pool, it is necessary to turn on the self-priming pump for 1-2 minutes and turn on a circulating pump to start vacuuming. After the vacuuming is completed, immediately close the above valves and the lower suction inlet, turn off the circulation pump. After all the pool dust vacuuming is finished, it is time to disinfect.
After the disinfectant is finished, open the inlet valve of the pool and spa, and then open the upper pool return valve and half floor valve of children pool. Firstly turn on the self-priming pump for 1-2 minutes. At the same time, turn on 4 circulation pumps and 3 hydrotherapy circulation pumps. Circulation 6-8 hours per day
Turn off all the circulation pumps and the check valvesAfter checking the valve, close all air switch of the electric control box.
Poolking as a professional sand filter manufacturer, it will offer satisfactory equipment to make you have comfortable swimming pool.