Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.                                                                              +8613922334815


when backwash pool filter


Author: Poolking - Swimming Pool Equipment Manufacturer

When Backwash Pool Filter: Keep Your Pool Clean and Safe

Maintaining a clean swimming pool is essential for ensuring the health and safety of swimmers. The filtration system of a pool plays a vital role in keeping the water clean and free from harmful contaminants. Backwashing your pool filter is an important aspect of pool maintenance that should not be overlooked. In this article, we'll discuss what it means to backwash a pool filter and how to do it effectively.

What is pool filter backwashing?

Pool filter backwashing is the process of cleaning out the debris and dirt from the filter media. Over time, pool filters become clogged with debris, blocking the flow of water through the filter. When the filter is backwashed, water is forced through the filter in the opposite direction, dislodging the dirt and debris that has accumulated in the filter media. The dislodged debris is then flushed out of the filter and into a waste line.

Why backwash your pool filter?

Backwashing your pool filter is important to maintain proper water circulation and filtration. A clogged filter can reduce the flow of water, which can cause stress on the pump and lead to costly repairs. Additionally, a dirty filter cannot effectively remove debris, bacteria, and other contaminants from the pool water, potentially leading to unsafe swimming conditions.

When should you backwash your pool filter?

It is generally recommended to backwash your pool filter every 4-6 weeks during peak swimming season. However, the frequency of backwashing will vary depending on several factors, including the size of the pool, the frequency of use, and the type of filter. A good indicator that it's time to backwash your filter is if the pressure gauge displays a reading that is 8-10 psi over the normal operating pressure.

How to backwash your pool filter:

1. Turn off the pool pump: Before backwashing, be sure to turn off the pool pump to avoid damaging the system.

2. Locate the waste line: The waste line is typically located near the filter system and will be a pipe that leads out of the pool area.

3. Backwash valve: Check to ensure that the backwash valve is in the correct position for backwashing.

4. Backwash: Turn the pump back on and allow it to run for 2-3 minutes, or until the water running out of the waste line runs clear.

5. Rinse: After backwashing, turn off the pump, move the backwash valve to the "rinse" position, and turn the pump back on for an additional 1-2 minutes to flush out any remaining debris from the filter.

In conclusion, backwashing your pool filter is an essential aspect of maintaining a clean and healthy swimming pool. By following these simple steps, you can ensure that your pool filtration system is running efficiently and effectively. Remember to backwash your pool filter regularly to avoid costly repairs and provide a safe and enjoyable swimming experience for you and your family.


Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English