Precautions for installation of softened water equipment Installation of softened water equipment: 1. The device must be placed indoors to prevent freezing and sun protection, and must prevent impact when moving. Installation of softened water equipment: 2. During installation, a 0.5-meter gap should be left around for inspection and maintenance. Installation of softened water equipment: 3. The inlet water pressure is required to be between 0.3-0.4MPa. If the requirements are not met, additional pressure and decompression measures can be added.
Installation of softened water equipment: 4. The user should prepare a softened water tank. The volume should be determined according to the usage conditions to meet the water requirements. The softened water tank should have anti-corrosion measures to prevent the softened water from being polluted again. Installation of softening water equipment: 5. There is no need to make an installation foundation, and it can be installed on the foundation level. It is required to have sewage channels on the nearby ground. Installation of softening water equipment: 6. Keep the salt solution to a saturated concentration, and the solid salt should be higher than the level of the salt solution.
Soft water equipment installation: 7. After installation, the pipeline should be flushed to prevent impurities from clogging and polluting the resin. Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..