Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.                                                                              +8613922334815


Overview and characteristic analysis of ultraviolet sterilizer products


The ultraviolet sterilizer provided by Guangdong Boying Environmental Protection Equipment Co., Ltd. uses stainless steel as the main material, high-purity quartz tube as the casing, and high-performance quartz ultraviolet low-pressure disinfection lamp tube. It has strong sterilizing power, long life, stable and reliable operation, Its sterilization efficiency is ≥99%, and the service life of imported lamp tubes is ≥9000 hours. It has been widely used in medicine, food, beverage, life, electronics and other fields. Product features of ultraviolet sterilizer ① The best conditions for the use of ultraviolet sterilizers are: Water temperature: 5°C-50°C Relative temperature: not more than 93% (at 25°C) Voltage: 220±10V 50Hz The water quality of drinking water entering the treatment equipment, Its 1cm transmittance is 95%-100%. If the water quality to be treated is lower than the national standard, such as the chroma is higher than 15 degrees, the turbidity is higher than 5 degrees, and the iron content is higher than 0.3 mg/L, first use other purification and filtration methods to make the purification reach Ultraviolet sterilizing equipment is used after the standard.

② Check regularly to ensure the normal operation of the UV lamp. The UV lamp should be turned on continuously, repeated switching will seriously affect the service life of the lamp. ③ Regular cleaning: According to the water quality, the ultraviolet lamp tube and the quartz glass sleeve need to be cleaned regularly. Wipe the lamp tube with alcohol cotton ball or gauze to remove the dirt on the quartz glass sleeve and wipe it clean. , so as not to affect the transmittance of ultraviolet rays, and affect the sterilization effect.

④ Replacement of the lamp tube: the imported lamp tube has been used continuously for 9000 hours, Or after one year, the ultraviolet lamp should be replaced to ensure a high sterilization rate. When replacing the lamp tube, first unplug the lamp power socket, pull out the lamp tube, then carefully insert the cleaned new lamp tube into the sterilizer, install the sealing ring, check for water leakage, and then plug in the power supply. Be careful not to touch the quartz glass of the new lamp with your fingers, otherwise the bactericidal effect will be affected by stains.

⑤ Prevent ultraviolet radiation: Ultraviolet rays have strong lethality to bacteria, and also have certain damage to the human body. When starting the disinfection lamp, avoid direct exposure to the human body. If necessary, use protective glasses. Do not directly look at the light source with your eyes, so as not to burn your eyes. membrane. Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..

Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English