Installation, debugging and characteristics of ultraviolet sterilizer

2023/03/27

The working principle of Guangdong Boying's "Yelan" brand ultraviolet sterilizer is to use ultraviolet rays with a wavelength of 225nm-275nm to kill microorganisms to purify water. When the water flows through the water processor, it is irradiated with ultraviolet light, and the bacteria in the water are killed. Product features of ultraviolet sterilizer 1. Ultraviolet sterilizer has fast sterilization speed and good effect. It does not change the physical and chemical properties of water, does not increase the smell of water, and does not produce carcinogenic chloroform. Once installed, it is easy to operate and manage.

2. The simplified body of the ultraviolet sterilizer is made of imported high-quality food-grade stainless steel plate. The service life is 5-10 times that of aluminum alloy products, with high pressure resistance and no metal ion pollution. 3. Ultraviolet germicidal lamps are professional products identified by the national health department and epidemic prevention department. The low voltage is 30W and the main spectral line is 235.7nm. The ultraviolet sterilization rate of this wavelength is the highest, reaching more than 98%, and the energy consumption is low. hours or more. 4. The electrical control part of the ultraviolet sterilizer and the cabinet adopt an integrated design, which is beautiful in appearance and saves space. It can reach 99%-99.9% sterilization rate in seconds.

2. Ultraviolet sterilizer has high-efficiency sterilization and broad-spectrum performance: the broad-spectrum performance of ultraviolet disinfection is the highest, and it can kill almost all bacteria and viruses with high efficiency. 3. Ultraviolet sterilizer has no secondary pollution: Ultraviolet sterilization does not add any chemical agents, so it will not cause secondary pollution to water bodies and the surrounding environment. Does not change any components in the water.

4. The operation of ultraviolet sterilizer is safe and reliable: Traditional disinfection techniques such as chloride or ozone are used, and the disinfectant itself is a highly toxic and flammable substance. The ultraviolet disinfection system does not have such a safety hazard. 5. The cost of ultraviolet sterilizer and operation and maintenance are low: the ultraviolet sterilizer occupies a small area and the requirements for structures are simple, so the total investment is less.

The cost of operation is also low. At the level of thousand tons of water treatment, its cost is only 1/2 of that of chlorine disinfection. Installation and commissioning of ultraviolet sterilizer: 1. The ultraviolet drinking water processor should be installed horizontally (vertical installation is strictly prohibited). 2. The cylinder body of the ultraviolet drinking water processor must not bear external pressure.

3. The ultraviolet drinking water processor should be installed at the outlet of the water tank or water tower. If the water volume is large, the water pressure is high or the pipe network is too long, it is better to install it on the water delivery trunk (branch) pipe close to the user. 4. Extending outward from both ends of the ultraviolet drinking water processor, a space of ≥ 1 meter and ≥ 0.4 meters should be left respectively to facilitate the replacement of the lamp tube. There should be a barrier-free space of 0.6 meters before the control panel of the ultraviolet drinking water processor , for easy maintenance. 5. Regardless of whether one or more UV drinking water processors are connected in parallel, bypass pipes and stop valves should be installed for easy maintenance.

6. Reasonably choose the installation location, and pay attention to the waterproof and moisture-proof of the electronic control part. 7. According to the voltage and power marked on the nameplate, select the power socket, wire or terminal block for connection. 8. Quartz glass sleeves and ultraviolet lamps are precious and fragile crystals, so avoid bumping during transportation, installation and use Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat
Now

Send your inquiry

Choose a different language
English
Türkçe
ภาษาไทย
русский
Português
한국어
日本語
العربية
Deutsch
Español
français
italiano
Current language:English