The correct solution to a clogged swimming pool pump

There are two main reasons why the anti-clogging performance of swimming pool pumps is getting more and more attention: one is the increase in the cost of swimming pool water treatment. Industrial enterprises are trying to reduce the water consumption per unit of product production, which makes the content of solid matter and fiber in sewage higher and higher. The second is that sewage pumps are increasingly adopting energy-saving means, that is, the driving mode of speed adjustment, but speed adjustment cannot guarantee that the swimming pool pump will not be blocked.

Aiming at the problem that impurities frequently clog the pump impeller, the swimming pool equipment adopts the method of cleaning every blockage at the initial stage of operation, and the method of cleaning the blockage does not stay overnight. Although the shutdown is avoided in this way, the pump body is often disassembled, causing the wear of parts such as the pump port ring to be intensified and a lot of manpower to clean up each time. In order to change this situation, a carbon steel anti-fouling box is installed at the water inlet pipe of the pump, and it is inclined at an angle of 45 degrees.

A filter is used inside the box to filter impurities again to avoid clogging. The team cleans up the pollution 1 to 3 times a month. There are two types of swimming pool pump rotor blades, namely swirl blades and cutting blades. These two types of blades are the most widely used.

The swirling impeller does not move in the conveyed medium, and guides the pumped medium into the pump cavity according to the principle of fluid dynamics, and the pumped medium flows past the impeller. In this way, long fibers or solid matter in the pumped liquid medium are also pumped out together. The cutting blades can chop up larger massive solids so that they are no longer clogged.

Daily maintenance measures for swimming pool pumps: a. Check frequently and clean the dirt basket regularly. When cleaning, do not knock on the dirt basket. If the dirt basket is damaged, it should be replaced in time.

b. Regularly check the sealing ring of the pump head cover. If it is damaged, please replace it in time. c. Keep the motor clean and keep the air outlet of the motor unobstructed.

d. Occasionally, the shaft sealing ring of the motor will be worn and should be replaced in time. e. In winter, the accumulated water in the pump head should be removed, the inside and outside of the pump should be cleaned, and the pump should be stored in a dry and well-ventilated room. The swimming pool water pump with high anti-clogging performance can make the swimming pool water treatment effect better and reduce manpower consumption.

But in the process of operating the swimming pool water pump to treat the pool water and impurities, pay attention to the operation safety Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..