Maintenance and maintenance of swimming pool water treatment equipment

The maintenance of sand tank filter and water pump of swimming pool water treatment equipment includes maintenance of water pump and hair collector, maintenance of dosing system, maintenance of control system, and maintenance of filter. The maintenance and maintenance of swimming pool water treatment equipment is an important part of swimming pool maintenance. Guangdong Boying Environmental Protection Equipment Co., Ltd. will explain to you the maintenance of swimming pool water treatment equipment, filter sand tanks and water pumps. Maintenance of water pump and hair collector The safe and correct operation of the equipment is the best way to maintain the equipment. When the water pump is turned on for the first time after installation, it must be confirmed that it is not reversed before it is turned on; if there is abnormal noise during the operation of the water pump Or vibration, stop the machine immediately for inspection; pay attention to the operation of the pump at any time to ensure the safe use of the pump.

If the flow rate of the water pump is much lower than the design flow rate, it should be stopped immediately for inspection. Moreover, the water pump must not run idling when there is no water; the hair collector should be checked and cleaned frequently; the air in the tank should be drained before the hair collector is cleaned and put back on the lid, and a layer of oil should be applied to the apron to Sealing, special attention should be paid to the fact that the water in the water pump and hair collector must be drained before the water pump needs to be shut down for a long time in winter. Maintenance of the dosing system The medicine metering pump should be cleaned with clean water after stopping dosing in each swimming season; there should be no granular medicine when the medicine solution is prepared; the dosing metering pump should not be idling for a long time; When taking medicine, the valve at the outlet of the metering pump should be closed; when the swimming pool is out of use for a long time, the medicine barrel, the filter head of the metering pump, the one-way valve and the hose should be cleaned.

Maintenance of the control system The control system must be placed in a suitable location, kept dry and ventilated, and not wet; it must be operated by trained personnel, and it must be operated strictly according to the panel labels; Filter maintenance The filter plays an important role in the swimming pool water treatment process. It plays an important role. The filter must be in place during the operation. The multi-way valve on the filter is absolutely not allowed to operate under pressure, and must be operated under the state of no pressure when the machine is stopped; in addition, the resistance of the sand cylinder increases. A certain range (2.5kg/cm2) must be backwashed. Guangdong Boying Environmental Protection Equipment Co., Ltd. is a leading brand in the swimming pool water treatment industry. Its main products include: stainless steel sand tanks, hair collectors, ultraviolet sterilizers and other swimming pool filtration equipment. It focuses on providing users with the most professional products, including providing users with Professional operation and maintenance knowledge, as well as perfect after-sales service, relieve users from worries. National consultation telephone: 4008-335-020 Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..