Matters needing attention in the operation of reverse osmosis equipment

The reverse osmosis equipment adopts advanced single-stage low-pressure reverse osmosis technology to purify tap water. Combined with the well-designed filter box adsorption system, it can effectively remove harmful substances such as bacteria and heavy metal ions in the water, and at the same time remove chloroform, fluorine, etc. carcinogens. The conductivity of pure water prepared by reverse osmosis equipment is lower than 30us/cm, which meets the requirements of national standards. The following is a brief introduction to the precautions in the operation of reverse osmosis equipment.

Precautions in the operation of reverse osmosis equipment 1. The water production of reverse osmosis equipment is above 500L/H when the water temperature is 25°C. If the water temperature rises or falls by 1°C, the water production will increase or decrease by about 3%, which is determined by the characteristics of the RO membrane. of. 2. The residual chlorine content of the water entering the RO membrane should be strictly controlled below 0.1PPm. The method is: connect the water to the sampling port of the adsorption filter and test it with a residual chlorine measuring agent. If it exceeds the standard, replace the activated carbon filter material. 3. If the water intake is insufficient or the pressure is too low, the machine will stop automatically due to water shortage and under-pressure system.

4. When the reverse osmosis equipment is used for the first time, the membrane contains preservatives. The conductivity of the effluent water will be high and rinse for 1-2 hours, and the water will be produced normally for a period of time, and the conductivity of the effluent water will be significantly reduced. Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..