Operation, maintenance and management of swimming pool water treatment accessories

Operation, maintenance and management of swimming pool accessories Hair collector 1. The filter cartridge of the hair collector should be cleaned once a day; 2. If there are no spare filter cartridges, replace them once a day; Operation and maintenance requirements for circulating water pumps (including air pumps) 1. The water pumps should be turned on one by one when the water outlet pipe of the pump is closed. Then slowly open the valve again. And the working pump and the standby pump run alternately, serving as backup for each other.

The swimming pool water treatment pump should not be turned off and on frequently, which not only affects the life of the motor, but also is not good for saving electric energy. 2. Record the operation of the water pump for the following items every day and every session: 1) Check the current value and temperature rise of the motor under different water volumes; 2) The noise, vibration, sealing, bearing lubrication, etc. of the rotating parts of the water pump; 3) The pressure gauge readings of the inlet and outlet pipes under different water flows; 4) The location of the fault, the cause and the troubleshooting method; 3. The water pump should be repaired once a year to check the bearing wear and mechanical seal, and remove all kinds of impurities. Wearable parts should be replaced when necessary. 4. If the running time of the water pump exceeds 500 hours or the running time specified by the supplier, the bearing should be refueled.

Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..