Detailed introduction of swimming pool hair collector

The hair collector is also called the hair collector. It is mainly used in reclaimed water treatment and swimming pool circulating water treatment systems. It is used as a pre-filtration treatment to remove hair, fibrous substances and larger suspended substances in the water, so as to prevent them from wrapping around the impeller of the circulating water pump. Subsequent system equipment is operating normally. Working principle: There is a stainless steel filter screen inside the equipment, and the raw water is filtered through the internal metal filter screen to block debris in the screen, and the purified water flows out. There is a sewage outlet at the bottom of the container, which can remove sediment, hair, fibers and other sundries, and the filter can be removed from the inside for cleaning.

Purpose: The function of the hair collector is to collect hair and fibrous substances in the water, remove large floating objects in the water, prevent hair from entering the pump and packing, affect the normal operation of the pump, block the pores of the packing, and eliminate the need for post-processing possible adverse effects of the device. In order to prevent hair and other sundries in the swimming pool from entering the circulating water pump and filter, so as not to damage the equipment, a hair collector should be installed before the main return pipe or the water pump inlet. The quick-opening hair collector carefully designed by swimming ring environmental protection technicians is now on the market. It has the advantages of reasonable structure, small filter resistance, corrosion resistance, and long life. It can be opened and closed quickly and is very convenient to operate.

In order to take into account both sewage treatment and reclaimed water utilization, this hair collector is selected. It is made of stainless steel and carbon steel respectively. Users can choose flexibly according to their own conditions. General principles for hair collector selection: 1. Inlet and outlet diameter: In principle, the inlet and outlet diameter of the filter should not be smaller than the inlet diameter of the matching pump, which is generally consistent with the inlet pipe diameter. 2. Nominal pressure: Determine the pressure rating of the filter according to the highest possible pressure in the filter pipeline.

3. The selection of the number of holes: The main consideration is the particle size of the impurity to be intercepted, which is determined according to the process requirements of the medium. For the particle size that can be intercepted by wire mesh of various specifications, please refer to the table "Filters Specifications" below. Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..