Precautions for the operation of swimming pool chemicals

Points for attention in the operation of swimming pool chemicals: (1) Put the precipitant directly into the swimming pool water, usually after the end of the night; the amount of chlorine Pa enzyme clarifier is generally put in at a ratio of 0.2 grams per cubic meter of water, and it is used for disinfection in actual use Depending on the precipitation of the purification pool water, the appropriate amount should be increased or decreased. After 5-6 hours of adding the precipitant, the dirt can be settled to the bottom of the pool, and then the dirt can be sucked. (2) Put the floating water disinfectant directly into the swimming pool, usually after the game ends at night, or choose the time to put it in according to the actual situation of the swimming pool. The amount of disinfectant is generally injected at a ratio of 0.2 liters per cubic meter of water, and it can also be increased or decreased according to the actual size of the swimming pool.

Note: Disinfectant and precipitant cannot be put in at the same time, and they must be put in separately every 5-6 hours, otherwise the drug reaction will affect the water quality. (3) Use a swimming pool pH tester to check whether the swimming pool water is neutral, and add acid (copper sulfate) or edible alkali (sodium carbonate) to adjust the pH. (4) After dispensing the disinfectant, start the water pump for water circulation, which can fully and evenly mix the pool water and the medicine, and the effect is better.

Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..