how to use pool filter pump


Author: Poolking - Swimming Pool Equipment Manufacturer

How to Use Pool Filter Pump: Guide for Beginners

If you are a pool owner, you know how important it is to ensure the water is clean and free from debris. To achieve this, it is essential to have a pool filter pump. However, using a filter pump can be daunting, especially for beginners. In this article, we will provide a comprehensive guide on using a pool filter pump.

What is a pool filter pump?

A pool filter pump is an essential tool used in pool maintenance. It functions to eliminate dirt, debris, and other contaminants from the pool water. The pump operates by pumping water through a filtration system and returns the clean water back into the pool.

Types of pool filter pumps

There are three main types of pool filters pumps: sand, cartridge, and diatomaceous earth (DE) filter pumps.

1. Sand filter pump: A sand filter uses a bed of sand to remove particles from the water by trapping them in the sand's crevices.

2. Cartridge filter pump: This type of filter uses a cartridge as the filtration medium. When the water passes through the cartridge, it traps dirt and other particles, ensuring the water remains clean.

3. DE filter pump: The DE filter pump uses diatomaceous earth, a natural material. The DE powder coats a filter grid, and the water passes through it, trapping debris and other contaminants.

Now that we have identified the three main types of filter pumps let's dive into how to use a pool filter pump.

Using a pool filter pump

Step 1: Turn off the power

Before you start using the pool filter pump, ensure the power is off. Locate the circuit breaker and turn off the power supply to the pool's equipment. This step is critical, and it is essential you adhere to it to avoid electrocution.

Step 2: Turn off the valves

Next, turn off the valves located near the pump. The valves control the flow of water into the pump system, and it is essential you turn them off to avoid any water flowing into the system while you work on the pump.

Step 3: Remove the pump cover

Remove the pump cover to access the pump basket. The pump basket is where you will find the debris that has been collected from the pool. You can remove the debris and clean the basket before replacing it back into the pump.

Step 4: Clean the filter

For sand filters: If you have a sand filter, backwash it by putting it in the backwash setting. This process should take approximately five minutes. Afterward, turn off the pump and set it to the rinse setting for two minutes. Once done, turn the pump off again and set it to normal filtering mode.

For cartridge filters: Remove the cartridge and clean it using a hose. Take care not to damage the cartridge. It is essential to clean the cartridge regularly to ensure it functions effectively. If the cartridge is damaged, replace it with a new one.

For DE filters: With DE filters, you have to add the DE powder manually. Add the powder to the skimmer, and the pump will distribute it to the filter. Ensure you add the right amount of DE powder based on the manufacturer's instructions.

Step 5: Start the pump

After completing the above steps, turn on the power and the valves, and start the pump. The pump will start working by pumping water through the system, filtering out any debris and returning clean water to the pool.


Using a pool filter pump is essential in maintaining a clean and healthy pool. It is vital to follow the steps provided above to ensure the pump works effectively. Remember, each pump is unique, and it is essential to follow the manufacturer's instructions for each specific pump. With these instructions, you are sure to have a clean pool all year round.


Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English