Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.                                                                              +8613922334815

Language

how to use a hayward sand pool filter

2023/11/06

Author: PoolKing - Pool Sand Filter Manufacturers

.


Hayward sand pool filters are a great investment for anyone who wants to keep their pool clean and clear. These filters are easy to use and maintain, and they can last for many years with proper care. In this article, we will explain how to use a Hayward sand pool filter, including the steps involved in installation, operation, and maintenance. We will also discuss some tips and tricks for getting the most out of your filter.


How to Install a Hayward Sand Pool Filter


Before you can use your Hayward sand pool filter, you need to install it properly. Here are the basic steps involved in the installation process:


Step 1: Choose a Location


The first step is to choose a location for the filter. You should pick a spot that is easily accessible and close to the pool pump. You will also need a level surface to place the filter on.


Step 2: Assemble the Filter


Next, you will need to assemble the filter. Follow the instructions that came with your particular model, but in general, this will involve attaching the base, adding the sand, and securing the lid.


Step 3: Connect the Plumbing


Once the filter is assembled, you can connect the plumbing. This will involve attaching the inlet and outlet pipes, as well as any other necessary connections.


Step 4: Prime the Pump


Before you start the pump, you will need to prime it. This involves filling the pump with water to remove any air pockets.


Step 5: Start the Pump


Finally, you can start the pump and turn on the filter. You should be able to see the water flowing through the filter, and you should notice an improvement in water clarity within a few hours.


How to Operate a Hayward Sand Pool Filter


Now that your filter is installed, you need to know how to operate it. Here are some basic tips for using your Hayward sand pool filter:


Tip 1: Set the Filter to "Filter"


The first step is to set the filter to "filter" mode, which is the default setting. This will allow water to flow through the sand and remove any debris.


Tip 2: Backwash the Filter


Over time, the sand in the filter will become clogged with debris, which will reduce its effectiveness. To fix this, you will need to backwash the filter, which involves reversing the flow of water through the sand.


Tip 3: Rinse the Filter


After backwashing, you should rinse the filter to remove any remaining debris. This will ensure that the sand is clean and ready to filter the water again.


Tip 4: Check the Pressure


Throughout the filtering process, you should keep an eye on the pressure gauge. If the pressure gets too high, it means the sand is clogged and you need to backwash the filter.


Tip 5: Use the Timer


If your pool pump has a timer, you should use it to automate the filtering process. This will save you time and ensure that your pool is always clean and clear.


How to Maintain a Hayward Sand Pool Filter


Finally, you need to know how to maintain your Hayward sand pool filter to ensure that it lasts as long as possible. Here are some tips for maintaining your filter:


Tip 1: Replace the Sand


Over time, the sand in your filter will become worn out and need to be replaced. You should do this every few years, depending on how often you use your pool.


Tip 2: Clean the Filter


In addition to backwashing and rinsing, you should also periodically clean the filter. This involves disassembling the filter and hosing it down to remove any stubborn debris.


Tip 3: Lubricate the O-rings


The O-rings on your filter can become dry and crack over time, leading to leaks. To prevent this, you should lubricate them with silicone grease every year or so.


Tip 4: Store the Filter Properly


If you live in an area with freezing temperatures, you should store your filter indoors during the winter to prevent damage.


Tip 5: Call a Professional


If you ever experience any issues with your filter that you can't resolve yourself, it's best to call a professional pool technician. They will have the knowledge and tools needed to diagnose and repair any problems.


In conclusion, using a Hayward sand pool filter is easy and straightforward, as long as you follow the steps outlined in this article. With proper installation, operation, and maintenance, your filter will help keep your pool clean and clear for many years to come.

.

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat
Now

Send your inquiry

Choose a different language
English
Türkçe
ภาษาไทย
русский
Português
한국어
日本語
العربية
Deutsch
Español
français
italiano
Current language:English