Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.                                                                              +8613922334815


how to install pool filter


Author: Poolking - Swimming Pool Equipment Manufacturer

Installing A Pool Filter: A Step-by-Step Guide

Installing a pool filter may sound like a daunting task, but it is actually quite simple. With the right tools and guidance, anyone can do it. In this guide, we will walk you through the steps to successfully install your pool filter, ensuring that your pool stays clean and clear.

Before you Begin: Preparing for Installation

Before you start installing your pool filter, there are a few things you need to do first:

1. Choose the right filter. Your filter size will depend on the size of your pool. Be sure to choose the correct size to avoid any issues with filtering.

2. Turn off the pool pump. Make sure that the pool pump is turned off before handling any of the filter components.

3. Gather your tools. You will need a Phillips screwdriver, a pair of pliers, and Teflon tape.

Step 1: Unboxing Your Filter

Your pool filter will come in a box with several components. Carefully unbox the filter and make sure you have all the necessary parts. The most common components include the filter cartridge, filter housing, and pressure gauge.

Step 2: Assembly of the Filter

The next step is to assemble the filter components. Start by installing the filter cartridge into the housing. Make sure you follow the manufacturer's instructions carefully. Some filters require a specific orientation of the cartridge, so be sure to check the manual.

Once the cartridge is installed, attach the pressure gauge to the top of the housing. Make sure the O-ring is in place before screwing in the gauge.

Step 3: Attaching the Filter to The Pump

The next step is to connect the filter to the pool pump. Start by turning off the pool pump, then remove the pump lid. Locate the intake pipe and remove the threaded adapter. Replace the adapter with the adapter provided in your filter kit.

Next, attach the plumbing and fittings to the filter intake and output ports. Be sure to use Teflon tape on all plumbing connections to prevent leaks.

Step 4: Finishing Up

The final step is to turn on the pool pump and inspect the filter for any leaks. Start by letting the pump run for a few minutes to ensure the water is flowing correctly. Check the pressure gauge reading, which should be within the recommended range.

If everything looks good, then you are done! Sit back and enjoy your clean and clear pool.

Benefits of Installing a Pool Filter

Installing a pool filter has a lot of benefits. Here are just a few:

1. Keeps your pool water clean and clear: A pool filter removes dirt, debris, and other particles from your pool water so that it stays clean and clear.

2. Reduces the need for chemicals: With a pool filter, you won't need to add as many chemicals to your pool to keep it clean. This can save you money in the long run.

3. Extends the life of your pool equipment: A pool filter helps to protect other pool components such as the pump and heater by removing debris before it can clog up these systems.

4. Saves you time: With a pool filter, you won't need to spend as much time manually cleaning your pool. A filter will do the job for you, allowing you to spend more time relaxing in your pool.


Installing a pool filter may seem difficult, but it's not. Follow the steps outlined in this guide, and you'll have a clean and clear pool in no time. Remember to always follow the manufacturer's instructions and use the appropriate tools and components. With a pool filter, you'll enjoy more time relaxing in your pool and less time cleaning it.


Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English