how to hook up pool filter


Author: Poolking - Swimming Pool Equipment Manufacturer

How to Hook Up Your Pool Filter: A Comprehensive Guide

If you’re a new pool owner or just need a refresher on how to hook up your pool filter, you’ve come to the right place. In this guide, we’ll walk you through step by step on how to properly connect your pool filter system to keep your pool crystal clear all season long.

1. Know Your Pool Filter System Components

Before you begin the installation process, it’s essential to understand the different components of your pool filter system. The three main pieces of equipment you’ll need to install are the pump, the filter, and the skimmer basket.

The pump, also known as the “heart” of the system, pulls water from the pool and pushes it through the filter to remove debris, dirt, and other contaminants. The filter, which is usually located between the pump and the pool, traps and removes impurities, while the skimmer basket catches large debris such as leaves and bugs.

2. Determine the Proper Placement for Your Pool Filter System

The ideal location for your pool filter system is close to the pool, but not so close that it becomes a hazard for swimmers. Make sure there is enough space around the equipment for easy operation and maintenance. Additionally, it’s best to place the system on a level surface that is capable of handling the weight of the equipment.

3. Connect the Skimmer Basket

Once you’ve determined the best location for your pump and filter, you’re ready to start the installation process. The first step is to connect the skimmer basket to the pump. The skimmer basket contains a suction line that connects to the pool’s intake valve that sucks water and debris into the basket.

To connect the skimmer basket to the pump, you’ll need a hose and hose clamps. Tighten the hose clamps firmly to ensure a secure connection.

4. Connect the Pump to the Filter

After connecting the skimmer basket to the pump, it’s time to connect the pump to the filter. As previously discussed, the pump is responsible for moving water through the filter. To do this, you’ll need to connect a hose from the pump’s output valve to the filter’s input valve.

Make sure to secure the hose with clamps to prevent leaks. If your system uses a pool cartridge filter, you’ll need to insert the cartridge into the filter housing.

5. Connect the Filter to the Pool

Once the pump is connected to the filter, you’ll need to connect the filter to the pool. This is where the filter output valve comes into play. Attach another hose to the output valve, and connect it to the pool’s return port. This port is usually located on the pool wall and is responsible for returning clean water back to the pool.

Double-check all connections, and make sure they are tight to prevent leaks. Once everything is connected and secure, it’s time to prime the pump by filling the pool system with water. Turn on the pump and watch for any leaks or air bubbles.


Congratulations, you’ve successfully hooked up your pool filter system! Remember to maintain and clean your system regularly to prevent clogs and ensure optimal performance. By following these steps, you’ll enjoy a crystal-clear pool that is perfect for all your summer fun activities.


Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English