Keeping your pool clean isn't just about maintaining the water chemistry. It's also important to have a clean and functioning pool filter. The Sta-Rite pool filter is a popular choice for many pool owners because of its durability and efficient filtration process. However, even the best pool filter needs to be cleaned regularly to remove debris and maintain proper water flow. In this article, we'll go over how to clean your Sta-Rite pool filter so it can continue to keep your pool sparkling clean all season long.
1. Understanding the Sta-Rite Pool Filter
Before you can properly clean your Sta-Rite pool filter, it's important to understand its parts and how it functions. The Sta-Rite pool filter is a high-rate sand filtration system that uses a special type of sand called AquaQuartz. This sand is designed to trap debris and particles as small as 20 microns. The filter includes a tank, a diffuser, a standpipe, laterals, and a nozzle.
2. Turn Off the Pump and Drain the Water
Before you can begin cleaning the pool filter, you need to turn off the pool pump to ensure no water is flowing into the filter. Next, drain any standing water in the filter by opening the air relief valve. This will release trapped air and water pressure.
3. Remove the Filter Tank Lid
The filter tank lid is located on top of the tank and can be removed by loosening the clamps or bolts that secure it in place. Once the lid is removed, you'll be able to access the filter's sand and other components.
4. Inspect the Sand
Inspect the sand to see if it needs to be replaced. The sand in the filter should be replaced every 3-5 years, depending on use and pool conditions. If the sand is worn down or caked in debris, it's time to replace it.
5. Clean the Sand and Laterals
If the sand doesn't need to be replaced, you'll want to clean it and the laterals. Using a garden hose, rinse the sand and laterals thoroughly to remove any debris or buildup. You can also use a pool filter cleaner to help remove any stubborn debris. Be sure to clean each lateral individually to ensure they are all clear and functioning properly.
6. Reassemble the Filter
Once everything is clean and in good condition, it's time to reassemble the filter. Replace the standpipe and laterals into the bottom of the tank and carefully pour in the new sand. Be sure to fill the tank to the manufacturer's recommended level.
7. Restart the Pump
Finally, it's time to restart the pool pump and allow the filter to run for several minutes before adding any chemicals or chlorine. This will allow the filter to circulate clean water throughout the system and ensure everything is functioning properly.
In conclusion, cleaning your Sta-Rite pool filter is essential for keeping your pool clean and maintaining proper water flow. By following these simple steps, you can easily clean your filter and keep your pool sparkling all season long. If you have any questions or concerns, be sure to consult the manufacturer's instructions or contact a pool professional for assistance..