how to clean first choice pool filter

Author: PoolKing - Pool Sand Filter Manufacturers

How to Clean First Choice Pool Filter: A Comprehensive Guide

Summer is here, and you want to make sure your pool is ready for it. A primary part of maintaining your pool is cleaning the filter. A First Choice pool filter is one of the most commonly used filters. To keep the filter in optimal condition, it is essential to have a deep understanding of how to clean it properly.

This guide will discuss everything you need to know about cleaning your First Choice pool filter, from the basics of how it works to the steps required to clean it.

How a First Choice Pool Filter Works

Before diving into the cleaning process, it is essential to understand how the First Choice pool filter works. The filter's primary purpose is to capture dirt, debris, and other contaminants from the pool water, keeping it clean and safe to swim in.

A First Choice pool filter operates using a combination of sand and gravel, which allows water to pass through, leaving dirt, debris, and other pollutants behind. Over time, these impurities build up and start to clog the filter, reducing its effectiveness.

Why Clean Your First Choice Pool Filter?

Cleaning your First Choice pool filter keeps the water fresh and clean, extending the filter's life. A dirty filter can result in cloudy water, and in extreme cases, it can even cause your pool water to turn colors. A dirty filter will also put a strain on your pool pump, making it work harder to circulate water through the filter.

When to Clean Your First Choice Pool Filter

The frequency of cleaning your First Choice pool filter varies based on usage and the environment. Most experts suggest cleaning the filter monthly. However, you may need to clean it more often if you have heavily used or surrounding vegetation that requires more filtration.

Step-by-Step Guide on How to Clean Your First Choice Pool Filter

Step 1: Turn Off the Power

Before you start any work on your pool filter, it is important to turn off the power to your filter. Turn off the pump and any other electrical components that may be connected to the filter.

Step 2: Open the Filter and Remove the Contents

Next, open the filter and remove the contents. This process usually requires a few tools, such as a wrench or screwdriver, depending on your filter's specifications.

Step 3: Check and Clean the Parts

Inspect each part of the filter carefully, looking for damage, cracks, or wearing off. Check the sand levels and replace the sand if it is needed.

Step 4: Soak the Grids in Cleaning Solution

Fill a large container with cleaning solution and soak the grids for 24 hours. You can make a cleaning solution at home by mixing water and muriatic acid. Or you can purchase a commercial pool filter cleaner from a local pool supply store.

Step 5: Rinse and Reassemble

After the 24-hour soaking period, remove the grids and rinse them off with a garden hose. Reassemble the filter and add new sand according to your filter's instructions.

Final Thoughts

Remember, cleaning your First Choice pool filter is essential for keeping your pool water clean and healthy. Following these steps will help with the process, and always remember to read the user manual for additional information. Maintaining the filter regularly can significantly enhance the lifespan and efficiency of the filter. Enjoy your pool season by keeping it clean and sparkling!